Section 208 specifies the minimum number of parking spaces required to be accessible....
Search Results "Specified Public Transportation"
Commonly Searched Documents
-
208 Parking Spaces
-
III-7.5180 Assembly areas
This section specifies the number of wheelchair seating spaces and types and numbers of assistive listening systems required in assembly areas. 1) Wheelchair seating: Requirements for...
-
Annualized Costs to Large Transit Entities for Automated Announcement Systems
Large transit agencies, in turn, are defined in the 2016 Non-Rail Vehicle Guidelines as public transportation providers operating 100 or more buses in annual maximum service in fixed route...
-
F. Availability of Materials Incorporated by Reference
one voluntary consensus standard in T603.5, a standard from the International Organization for Standardization (ISO) concerning securement systems for rear-facing wheelchair positions in transportation...
-
C. Americans with Disabilities Act and Section 504 of the Rehabilitation Act
Title II of the ADA (42 U.S.C. 12131 to 12165) applies to state and local governments, and Title III of the ADA (42 U.S.C. 12189 to 12189) applies to private entities that are public accommodations...
- Tax Benefits for Businesses Who Have Employees with Disabilities
-
Private Buildings: ADA Standard Section 217.4.2.2
Section 217.4.2.2 covers scoping requirements in the current ADA Standards for TTYs in private buildings.
-
11B-217.4.2.2 Private buildings
Where four or more public pay telephones are provided on a floor of a private building, at least one public TTY shall be provided on that floor....
-
11B-806.2 Guest rooms with mobility features
For example, closets in guest rooms must comply with the applicable provisions for storage specified in scoping....
-
Seat Height
The proposed rule specified that the bench seat be 17 to 19 inches above the floor or ground (903.4)....
-
382.71 What other aircraft accessibility requirements apply to carriers?
accessibility features in proper working order and tells carriers to ensure that any replacement or refurbishing of cabin features does not reduce existing accessibility to a level below that specified...
-
1011.1 General
Outdoor constructed features specified in 1011.4 through 1011.8 shall comply with those provisions, as applicable. Advisory 1011.1 General. ...
-
§ 35.151(b)(3)
(3) Alterations to historic properties shall comply, to the maximum extent feasible, with the provisions applicable to historic properties in the design standards specified in § 35.151(c...
-
Illumination Levels (Reserved) [4.30.8]
Illumination Levels (Reserved) [4.30.8] Recommendations: Due to variations in field conditions, illumination levels are not specified in ADAAG....
-
1011.1 General
Outdoor constructed features specified in 1011.4 through 1011.8 shall comply with those provisions, as applicable. Advisory 1011.1 General....
-
4.34.5.3 LAVATORY, MIRRORS, AND MEDICINE CABINETS
(2) If a cabinet is provided under the lavatory in adaptable bathrooms, then it shall be removable to provide the clearances specified in 4.22.6....
-
11B-806.2 Guest rooms with mobility features
For example, closets in guest rooms must comply with the applicable provisions for storage specified in scoping....
-
NPRM and Comments
Disability community commenters and one transportation provider stated that all existing stations should be made accessible or, at least, that if an existing station began to meet key station...
-
Accessible Boat Slips
Sections 235.2 and 1003.3.1 of the 2010 Standards require that a specified number of boat slips in each recreational boating facility meet specified accessibility standards....
-
Volume Control
All public telephones are required to be equipped with volume control, as discussed above in section 217....
-
Parallel Curb Ramps (R304.3) (Section-by-Section Analysis)
A minimum running slope of 5 percent and a maximum running slope of 8.3 percent are specified for parallel curb ramps, and the ramp length is limited to 4.5 meters (15 feet)....
-
Size and Spacing of Grab Bars and Handrails [4.26.2]
A gripping surface with a diameter between 1¼ to 1½ inches is specified. Alternate shapes are permitted that allow a similar opposing grip....
-
Treads and Risers [4.9.2], Nosings [4.9.3]
ADAAG requires the height to be uniform but does not specify a minimum or maximum height which is addressed by most local building codes....
-
Compliance Requirements in Final Rule
Scoping requirements specify what features are required to be accessible and, where multiple features of the same type are provided, how many of the features are required to be accessible...