, which can extend to a height of 4 inches above the floor at a depth of 28 inches....
Search Results "Floor Button"
Filters
Commonly Searched Documents
-
b. Exception for Base Support Allowance and Unobstructed Knee and Toe Space
-
11B-502.6 Identification
Signs shall be 60 inches (1524 mm) minimum above the finish floor or ground surface measured to the bottom of the sign. [2010 ADAS] 502.6 Identification. ...
-
Alterations [4.1.6(1)(f) & (k)]
Thus, the exception from the requirement for an elevator in buildings with less than 3 stories or with less than 3,000 square feet per floor applies to altered facilities as well, including...
-
Trail Facilities
For example, if a camp shelter is provided along a trail and its floor is above the ground, all hikers must be able to get inside the shelter....
-
11B-502.6 Identification
Signs shall be 60 inches (1524 mm) minimum above the finish floor or ground surface measured to the bottom of the sign. [2010 ADAS] 502.6 Identification. ...
-
SHOPPING CENTER (OR SHOPPING MALL)
A shopping center may include a series of buildings on a common site, connected by a common pedestrian access route on, above or below the ground floor, that is either under common ownership...
-
11B-502.6 Identification
Signs shall be 60 inches (1524 mm) minimum above the finish floor or ground surface measured to the bottom of the sign. [2010 ADA Standards] 502.6 Identification....
-
Feminine product dispensers
For purposes of resolving this matter, the Museum will provide, on each floor, at least one feminine product dispenser in the women's toilet rooms that does not requires tight grasping and...
-
803.5 Coat Hooks and Shelves
Shelves shall be 40 inches (1015 mm) minimum and 48 inches (1220 mm) maximum above the finish floor or ground....
-
1i
Are all of the small showers free of curbs or lips greater than 1/2" high at the shower floor that would impede wheelchair approach and transfer onto the folding shower seat?...
-
Volume Controls
Do at least 25% (not less than one) of all other house phones on each floor have volume controls? Yes __ No __ N/A __ Comments: ___________________________________________...
-
Volume Controls
Do at least 25% (not less than one) of all other pay phones on each floor have volume controls? Yes __ No __ N/A __ Comments: ___________________________________________...
-
Volume Controls
Do at least 25% (not less than one) of all other pay phones on each floor have volume controls? Yes __ No __ N/A __ Comments: ___________________________________________...
-
§ 38.31(b)
doorways in which lifts or ramps are installed, shall have, at all times, at least 2 foot-candles of illumination measured on the step tread, or lift or ramp, when deployed at the vehicle floor...
-
11B-809.8.4 Door signal devices
The activating mechanism shall be mounted 48 inches (1219 mm) maximum above the floor and connected to permanent wiring....
-
ASI Global Partitions Powder Coated Steel Partitions
Pilaster Mounting Pilaster adjustments, with floor-mounted jack-leveling device are standard on floor anchored/ overhead braced pilasters Pilaster Mounting Pilaster adjustments, with...
-
1118B.3
SECTION 1124B - GROUND AND FLOOR SURFACES 1124B.1 General. ...
-
Delta Single Function Hand Shower with Grab Bar RPW124HDF
Product Features and Benefits Two-setting white hand shower Two integral check valves for backflow protection Features Touch-Clean spray holes Push button...
-
Doorbell Factory Small Rectangle Stainless Steel Doorbell
Solid 3/16" thick Stainless Steel Plate Comes with non-lighted stainless steel push button and mounting screws Measures 1" W X 3" H Usually ships in 1-3 business...
-
Lutron Wireless Maestro Lighting Control
incredibly easy to install and operate, allowing you to control lighting levels with any combination of up to 10 dimmers, switches, sensors and wireless controls — all with the touch of a button...
-
Hager Companies Five Knuckle - Full Mortise Swing Clear Hinge BB1363
Five Knuckle - Full Mortise Swing Clear Hinge BB1363 - Ball Bearing - Heavy Weight Description: - ANSI A5121 - For beveled edge doors - Non-rising removable pin with button...
-
Hager Companies Five Knuckle - Full Mortise Swing Clear Hinge BB1361
Knuckle - Full Mortise Swing Clear Hinge BB1361 - Ball Bearing - Standard Weight Description: - ANSI A5122 - For beveled edge doors - Non-rising removable pin with button...
-
Hager Companies Five Knuckle - Half Mortise Swing Clear Hinge BB1264
Five Knuckle - Half Mortise Swing Clear Hinge BB1264 - Ball Bearing - Heavy Weight Description: - ANSI A8221 - For square edge doors - Non-rising removable pin with button...
-
Hager Companies Five Knuckle - Half Surface Swing Clear Hinge BB1270
Five Knuckle - Half Surface Swing Clear Hinge BB1270 - Ball Bearing - Heavy Weight Description: - ANSI A8421 - Beveled surface leaf - Non-rising removable pin with button...
