Vehicle spaces, access aisles serving them, and vehicular routes serving them shall provide a vertical clearance of 98 inches (2489 mm) minimum....
Search Results "Vertical Actuation Bar"
-
11B-812.4 Vertical clearance
-
Moen Home Care Peened 42" Grab Bar
complies with Americans with Disabilities Act (ADA) specifications 42" bar length 1.25" bar diameter corrosion resistant stainless steel construction for added durability limited...
-
604.8.2.3 Grab Bars
604.8.2.3 Grab Bars. Grab bars shall comply with 609. A side-wall grab bar complying with 604.5.1 shall be provided on both sides of the compartment....
-
AJW Architectural Products UG130-A Series UG130-A12 12" Exposed Flange, 1.5" Diameter Grab Bar - Configuration A
Installation: Before installing grab bars, verify with all state and local codes for requirements on bar diameter and type finish....
-
AJW Architectural Products UG120-A Series UG120-A12 12" Exposed Flange, 1.25" Diameter Grab Bar - Configuration A
Installation: Before installing grab bars, verify with all state and local codes for requirements on bar diameter and type finish....
-
AJW Architectural Products US130-A Series US130-A12 12" Exposed Flange, 1.5" Diameter Security Grab Bar - Configuration A
US130: Security Grab Bar, satin finish US130X: Security Grab Bar, non-slip finish "A" Style: 12" min. to 48" max. centerline dimension....
-
604.9.4 Grab Bars
604.9.4 Grab Bars. Grab bars for water closets shall comply with 604.5....
-
11B-809.10.7.3 Reinforcement for grab bars
Reinforcement for grabs bars shall comply with the following: Where water closets are not placed adjacent to a side wall capable of accommodating a grab bar, the bathroom shall...
-
11B-809.10.7.3 Reinforcement for grab bars
Reinforcement for grabs bars shall comply with the following: Where water closets are not placed adjacent to a side wall capable of accommodating a grab bar, the bathroom shall...
-
11B-307.4 Vertical clearance
Vertical clearance shall be 80 inches (2032 mm) high minimum. Guardrails or other barriers shall be provided where the vertical clearance is less than 80 inches (2032 mm) high....
-
604.5 Grab Bars (Exception 2)
604.5 Grab Bars (Exception 2) Exception 2 to this section permits grab bars to not be installed at water closets in residential dwelling units required to provide mobility features provided...
-
Vertical Clearance [4.6.5]
Vertical clearance of at least 98 inches is based on the height necessary for personally-owned vans....
-
Bobrick Swing-Up Grab Bar B-4998.99
Grab bar shall be type-304 stainless steel with satin finish. Grab bar shall have 18-gauge (1.2mm) wall thickness and 1–1/4" (32mm) outside diameter....
-
HealthCraft Invisia Towel Bar
The sleek Towel Bar gives any bathroom a modern look while providing a secure bar to hold onto when drying off....
-
Raised Courtroom Stations Not for Members of the Public
access when first constructed or altered if they are constructed to be easily adaptable to provide vertical accessibility....
-
604.8.2.3 Grab Bars
Grab bars shall comply with 609. A side-wall grab bar complying with 604.5.1 shall be provided on both sides of the compartment....
-
604.8.2.3 Grab Bars
Grab bars shall comply with 609. A side-wall grab bar complying with 604.5.1 shall be provided on both sides of the compartment....
-
AJW Architectural Products UG3-A Series UG3-A12 12" Concealed Snap Flange, 1.5" Diameter Grab Bar - Configuration A
Bars with greater offsets will support loads up to 250lbs when properly installed....
-
AJW Architectural Products UG2-A Series UG2-A12 12" Concealed Snap Flange, 1.25" Diameter Grab Bar - Configuration A
Bars with greater offsets will support loads up to 250lbs when properly installed....
-
4.1.3(4)
(4) Interior and exterior stairs connecting levels that are not connected by an elevator, ramp, or other accessible means of vertical access shall comply with 4.9....
-
Bobrick Swing-Up Grab Bar B-4998
., satin-finish stainless steel Swing-up grab bar is manually raised for approach or departure and lowered to horizontal position for support; once grab bar is raised to the full upright...
-
4.26.2* SIZE AND SPACING OF GRAB BARS AND HANDRAILS
The diameter or width of the gripping surfaces of a handrail or grab bar shall be 1-1/4 in to 1-1/2 in (32 mm to 38 mm), or the shape shall provide an equivalent gripping surface....
-
AJW Architectural Products UG30-A Series UG30-A12 12" Concealed Set Screw Flange, 1.5" Diameter Grab Bar - Configuration A
Flanges are heliarc welded to bar to form a one piece construction....
-
AJW Architectural Products UG20-A Series UG20-A12 12" Concealed Set Screw Flange, 1.25" Diameter Grab Bar - Configuration A
Flanges are heliarc welded to bar to form a one piece construction....
