At least one means of support for transferring shall be provided. Advisory 1008.3.2.3 Transfer Supports....
Search Results "Transfer Position"
-
1008.3.2.3 Transfer Supports
-
1009.4 Transfer Walls
1009.4 Transfer Walls. Transfer walls shall comply with 1009.4....
-
1009.5 Transfer Systems
1009.5 Transfer Systems. Transfer systems shall comply with 1009.5....
-
Spas: ADA Standard Section 242.4
Section 242.4 covers scoping requirements in the current ADA Standards for spas.
-
(4) Affiliate Transfers
(4) Affiliate Transfers: A transfer of interest that does not result in a change in control of the hotel;...
-
1008.3.1.4 Transfer Supports
1008.3.1.4 Transfer Supports. At least one means of support for transferring shall be provided. Figure 1008.3.1 Transfer Platforms...
-
11B-242.4 Spas
Accessible means of entry shall comply with swimming pool lifts complying with Section 11B-1009.2; transfer walls complying with Section 11B-1009.4; or transfer systems complying with Section...
-
11B-242.4 Spas
Accessible means of entry shall comply with swimming pool lifts complying with Section 11B-1009.2; transfer walls complying with Section 11B-1009.4; or transfer systems complying with Section...
-
5.6.1 Stirrups for Equipment Used by Patient in Supine, Prone, or Side-Lying Position
5.6.1 Stirrups for Equipment Used by Patient in Supine, Prone, or Side-Lying Position....
-
M301.2.3 Size
The size of the transfer surface shall comply with M301.2.3.1 or M301.2.3.2. The size of transfer surfaces shall be measured from center points of their opposing sides....
-
243 Shooting Facilities with Firing Positions
243 Shooting Facilities with Firing Positions...
-
1010 Shooting Facilities with Firing Positions
1010 Shooting Facilities with Firing Positions...
-
M301.2.2 Size
The transfer surface shall be 30 inches (760 mm) wide minimum and 15 inches (381mm) deep minimum. Advisory M301.2.2 Size....
-
M305.2.2 Length
The length of transfer supports shall comply with M305.2.2.1 or M305.2.2.2....
-
1010 Shooting Facilities with Firing Positions
This section requires turning space at firing positions required to be accessible....
-
11B-608.3.1 Transfer type shower compartments
In transfer type compartments, grab bars shall be provided across the control wall and back wall to a point 18 inches (457 mm) from the control wall....
-
11B-608.3.1 Transfer type shower compartments
In transfer type compartments, grab bars shall be provided across the control wall and back wall to a point 18 inches (457 mm) from the control wall....
-
4.3.2 Transfer Surfaces and Imaging Equipment Functions
4.3.2 Transfer Surfaces and Imaging Equipment Functions The transfer surface (table) of diagnostic imaging equipment serves two purposes: (1) it allows patients to be positioned properly...
-
M305.2.8 Fittings
Transfer supports shall not rotate within their fittings when in place for transfer....
-
1002.6.2 Transfer Height
1002.6.2 Transfer Height. The height of transfer device seats shall be 14 inches (355 mm) minimum and 24 inches (610 mm) maximum measured from the load and unload surface....
-
1009.5 Transfer Systems
Transfer systems shall comply with 1009.5....
-
1009.4 Transfer Walls
Transfer walls shall comply with 1009.4....
-
1009.4 Transfer Walls
Transfer walls shall comply with 1009.4....
-
1009.5 Transfer Systems
Transfer systems shall comply with 1009.5....