Symbols of accessibility and their background shall have a non-glare finish....
Search Results "Tactile Symbol"
-
703.7.1 Finish and Contrast
-
11B-703.7.1 Finish and contrast
Symbols of accessibility and their background shall have a non-glare finish....
-
703.4.1 Height Above Finish Floor or Ground
Tactile characters on signs shall be located 48 inches (1220 mm) minimum above the finish floor or ground surface, measured from the baseline of the lowest tactile character and 60 inches...
-
703.7.1 Finish and Contrast
Symbols of accessibility and their background shall have a non-glare finish....
-
703.7.1 Finish and Contrast
Symbols of accessibility and their background shall have a non-glare finish....
-
11B-703.7.1 Finish and contrast
Symbols of accessibility and their background shall have a non-glare finish....
-
Figure 703.4.1 Height of Tactile Character Above Finish Floor or Ground – Drawing from the U.S. Access Board
-
§ 38.73(b) Signage
The International Symbol of Accessibility shall be displayed on the exterior of each vehicle operating on an accessible light rail system unless all vehicles are accessible and are not marked...
-
407.3.1 Identification (Section-by-Section Analysis)
407.3.1 Identification (Section-by-Section Analysis) This section proposes to require input controls to be tactilely discernible without activation, as well as operable by touch....
-
Installation Height and Location: ADA Standard Section 703.4
Signs with tactile characters shall comply with 703.4....
-
11B-216.2 Designations
Pictograms that provide information about a room or space, such as "no smoking," occupant logos, and the International Symbol of Accessibility, are not required to have text descriptors....
-
11B-216.2 Designations
Pictograms that provide information about a room or space, such as "no smoking," occupant logos, and the International Symbol of Accessibility, are not required to have text descriptors....
-
11B-703.4 Installation height and location
Signs with tactile characters shall comply with Section 11B-703.4....
-
11B-703.4 Installation height and location
Signs with tactile characters shall comply with Section 11B-703.4....
-
Exhibit Design Relating to Low Vision and Blindness: What Visitors with Vision Loss Want Museums and Parks to Know about Effective Communication
Exhibit Design Relating to Low Vision and Blindness What Visitors with Vision Loss Want Museums and Parks to Know about Effective Communication By: Beth Ziebarth,...
-
Exhibit Design Relating to Low Vision and Blindness Summary Report
Exhibit Design Relating to Low Vision and Blindness Summary Report January 10, 2011 National Center on Accessibility National Center on Accessibility, Indiana University -...
-
T215.2.2 Wheelchair Spaces
Wheelchair spaces shall be identified by the International Symbol of Accessibility complying with T703....
-
11B-216.6 Entrances
SECTION TITLE NOTES 11B-216.6 Entrances Removes redundant exceptions...
-
11B-407.4.7.1.2 Location
Raised characters or symbols and Braille designations shall be placed immediately to the left of the control button to which the designations apply....
-
11B-407.4.7.1.2 Location
Raised characters or symbols and Braille designations shall be placed immediately to the left of the control button to which the designations apply....
-
11B-407.2.3.1 Floor designation
Floor designations shall be provided in both tactile characters and braille. Tactile characters shall be 2 inches (51 mm) high minimum....
-
11B-407.2.3.1 Floor designation
Floor designations shall be provided in both tactile characters and braille. Tactile characters shall be 2 inches (51 mm) high minimum....
-
F216.7 Elevators
Where existing elevators do not comply with 407, elevators complying with 407 shall be clearly identified with the International Symbol of Accessibility complying with 703.7.2.1....
