The bottom of diagonal curb ramps shall have a clear space 48 inches (1219 mm) minimum outside active traffic lanes of the roadway....
Search Results "Ramp Length"
Commonly Searched Documents
- 
    
  
  11B-406.5.9 Clear space at diagonal curb ramps
  
- 
    
  
  11B-406.5.9 Clear space at diagonal curb ramps
  The bottom of diagonal curb ramps shall have a clear space 48 inches (1219 mm) minimum outside active traffic lanes of the roadway.... 
- 
    
  
  11B-406.5.9 Clear space at diagonal curb ramps
  The bottom of diagonal curb ramps shall have a clear space 48 inches (1219 mm) minimum outside active traffic lanes of the roadway.... 
- 
    
  
  Handrail Height: ADA Standard Section 1008.2.5.3.2
  The top of handrail gripping surfaces shall be 20 inches (510 mm) minimum and 28 inches (710 mm) maximum above the ramp surface.... 
- 
    
  
  11B-1008.2.5.3.2 Handrail height
  The top of handrail gripping surfaces shall be 20 inches (508 mm) minimum and 28 inches (711 mm) maximum above the ramp surface.... 
- 
    
  
  4.8.5(1)
  (1) Handrails shall be provided along both sides of ramp segments. The inside handrail on switchback or dogleg ramps shall always be continuous.... 
- 
    
  
  11B-247.1.2.2 Curb ramps
  Curb ramps shall have detectable warnings complying with Sections 11B-705.1.1 and 11B-705.1.2.2. ... 
- 
    
  
  C1-5. Curb Ramp
  Where an accessible route crosses a curb is a curb ramp provided? If yes, Yes _____ No _____... 
- 
    
  
  11B-247.1.2.2 Curb ramps
  Curb ramps shall have detectable warnings complying with Sections 11B-705.1.1 and 11B-705.1.2.2.... 
- 
    
  
  11B-247.1.2.2 Curb ramps
  Curb ramps shall have detectable warnings complying with Sections 11B-705.1.1 and 11B-705.1.2.2.... 
- 
    
  
  T402.5 Surfaces
  Ramp and bridgeplate surface material shall comply with T302 and extend across the full width and length of the ramp or bridgeplate.... 
- 
    
  
  § 38.23(c)(6) Attachment
  When in use for boarding or alighting, the ramp shall be firmly attached to the vehicle so that it is not subject to displacement when loading or unloading a heavy power mobility aid and... 
- 
    
  
  § 38.23(c)(4) Ramp barriers
  (4) Ramp barriers. Each side of the ramp shall have barriers at least 2 inches high to prevent mobility aid wheels from slipping off.... 
- 
    
  
  Rise [§405.6]
  .), but there is no limit on the number of runs a ramp may have. Long ramps with many runs can be strenuous for people using manual wheelchairs.... 
- 
    
  
  Width and Length: ADA Standard Section 1002.4.4.1
  Wheelchair spaces shall provide a clear width of 30 inches (760 mm) minimum and a clear length of 48 inches (1220 mm) minimum measured to 9 inches (230 mm) minimum above the floor surface... 
- 
    
  
  § 38.23(c)(5) Slope
  Ramps shall have the least slope practicable and shall not exceed 1:4 when deployed to ground level.... 
- 
    
  
  405.6 Rise
  The rise for any ramp run shall be 30 inches (760 mm) maximum.... 
- 
    
  
  405.6 Rise
  The rise for any ramp run shall be 30 inches (760 mm) maximum.... 
- 
    
  
  11B-405.6 Rise
  The rise for any ramp run shall be 30 inches (762 mm) maximum.... 
- 
    
  
  11B-405.6 Rise
  The rise for any ramp run shall be 30 inches (762 mm) maximum.... 
- 
    
  
  11B-405.6 Rise
  The rise for any ramp run shall be 30 inches (762 mm) maximum.... 
- 
    
  
  405.7.2 Width
  The landing clear width shall be at least as wide as the widest ramp run leading to the landing.... 
- 
    
  
  405.7.2 Width
  The landing clear width shall be at least as wide as the widest ramp run leading to the landing.... 
- 
    
  
  11B-405.7.2 Width
  The landing clear width shall be at least as wide as the widest ramp run leading to the landing.... 
