Where diagnostic equipment used by patients in a supine, prone, or side-lying position, and diagnostic equipment used by patients in a seated position can be adjusted to reclined positions...
Search Results "Patient Change Area"
Commonly Searched Documents
-
Head and Back Support (M301.3.3 and M302.3.3)
-
11B-223.1 General
Because medical facilities frequently reconfigure spaces to reflect changes in medical specialties, 223.1 does not include a provision for dispersion of accessible patient or resident sleeping...
-
223.1 General
Because medical facilities frequently reconfigure spaces to reflect changes in medical specialties, Section 223.1 does not include a provision for dispersion of accessible patient or resident...
-
11B-223.1 General
Because medical facilities frequently reconfigure spaces to reflect changes in medical specialties, 223.1 does not include a provision for dispersion of accessible patient or resident sleeping...
-
223.1 General
Because medical facilities frequently reconfigure spaces to reflect changes in medical specialties, 223.1 does not include a provision for dispersion of accessible patient or resident sleeping...
-
M301.4 Lift Compatibility
Rationale: Harmonization with IEC 60601-2-52 "Particular requirements for the basic safety and essential performance of medical beds" Change clearance requirement to: 39 inches (1000 mm...
-
Load and Unload Areas: ADA Standard Section 234.4.1
Section 234.4.1 covers scoping requirements in the current ADA Standards for load and unload areas in existing amusement rides.
-
Clearance in Base (M301.4.1 and M302.4.1)
The clearance can be an open area between the supporting posts beneath the equipment, or the equipment can be configured with a wide slot that is recessed into the base enclosure....
-
Dispersion
Different units may be subject to different scoping requirements, such as an orthopedic wing (where 100% of patient rooms are required to be accessible) within a general hospital (where...
-
Load and Unload Areas: ADA Standard Section 206.2.9.1
Section 206.2.9.1 covers scoping requirements in the most current ADA Standards for accessible routes to load and unload areas of amusement rides.
- Guldmann GH3+ Lifting Module with Scale
-
221 Assembly Areas
Section 221.1 contains a general charging statement that assembly areas provide wheelchair spaces, companion seats, and designated aisle seats....
-
General: ADA Standard Section 1008.1
Play areas shall comply with 1008....
-
2.6 Brief History of Section 4203 of the Patient Protection and Affordable Care Act
2.6 Brief History of Section 4203 of the Patient Protection and Affordable Care Act The Section 4203 provisions of the Patient Protection and Affordable Care Act (ACA), which required...
-
Medical Care Facilities: ADA Standard Section 232.4
Section 232.4 covers scoping requirements in the current ADA Standards for medical care facilities.
-
11B-1008.1 General
Play areas shall comply with Section 11B-1008....
- Hill-Rom | Viking® M Mobile Lift | Operating the Lift
- Hill-Rom Sabina® II Sit-to-Stand Mobile Lift Operating the Lift
-
C1-d
Is the accessible route free of steps and abrupt level changes higher than 1/2 inch?...
-
11B-813.2.1.3 Height and operation
Adult changing table height shall be adjustable from 17 inches (432 mm) above the floor or ground to 38 inches (965 mm) above the floor or ground, as measured to the top of the changing...
-
M304 Diagnostic Equipment Used by Patients in Standing Position
[See subsections ...]
-
M304 Diagnostic Equipment Used by Patients in Standing Position
[See subsections ...]
- Midmark Ritter 223 Barrier-Free® Power Examination Table
-
11B-231.4 Visiting areas
Visiting areas shall comply with Section 11B-231.4....