Intercity rail passenger car means a rail car, intended for use by revenue passengers, obtained by the National Railroad Passenger Corporation (Amtrak) for use in intercity rail transportation...
Search Results "NARTE: National Association of Radio and Telecommunications Engineers"
Commonly Searched Documents
-
§ 37.3 Intercity rail passenger car
-
§ 37.211 Effect of NHTSA and FHWA safety rules
OTRB operators are not required to take any action under this subpart that would violate an applicable National Highway Traffic Safety Administration or Federal Highway Administration...
-
Low Energy Doors and Gates [§404.3]
Low Energy Doors and Gates [§404.3] Low energy doors and gates usually require activation by the user through a push plate or control and are often used in moderate traffic...
-
Other Requirements [4.11.2]
Questions on the ASME standard should be directed to the American Society of Mechanical Engineers at (212) 705‒8500....
-
Does the ADA require barrier removal in historic buildings?
However, the ADA takes into account the national interest in preserving significant historic structures....
-
11B-410.1 General
Platform lifts shall comply with ASME A18.1. Platform lifts shall not be attendant-operated and shall provide unassisted entry and exit from the lift. Advisory 11B-410.1...
-
§ 37.3 Public entity
means: (1) Any state or local government; (2) Any department, agency, special purpose district, or other instrumentality of one or more state or local governments; and (3) The National...
-
Alternate formats and alternate modes (Advisory Guidance)
Alternate formats and alternate modes 1. Alternate formats may include, but are not limited to, Braille, ASCII text, large print, and audio cassette recording. Alternate modes may...
-
§1193.2 Scoping.
This part provides requirements for accessibility, usability, and compatibility of new products and existing products which undergo substantial change or upgrade, or for which new...
-
11B-411.1 General
Destination-oriented elevators shall comply with Section 11B-411 and with ASME A17.1. They shall be passenger elevators as classified by ASME A17.1. Elevator operation shall be...
-
11B-810.9 Escalators
Where provided, escalators shall comply with the sections 6.1.3.5.6 and 6.1.3.6.5 of ASME A17.1 and shall have a clear width of 32 inches (813 mm) minimum. Exception: Existing...
-
407.1 General
Elevators shall comply with 407 and with ASME A17.1 (incorporated by reference, see "Referenced Standards" in Chapter 1). They shall be passenger elevators as classified by ASME...
-
The Most Common DESIGN Errors
◼ The Most Common DESIGN Errors (11/17/00) Click here to view or download "The Most Common DESIGN Errors" (75.7 KB pdf)
-
4.10.6* Door Protective and Reopening Device
Elevator doors shall open and close automatically. They shall be provided with a reopening device that will stop and reopen a car door and hoistway door automatically if the door...
-
A4.10.6 Door Protective and Reopening Device
The required door reopening device would hold the door open for 20 seconds if the doorway remains obstructed. After 20 seconds, the door may begin to close. However, if designed in...
-
4.10.1 General
Accessible elevators shall be on an accessible route and shall comply with 4.10 and with the ASME A17.1‒1990, Safety Code for Elevators and Escalators. Freight elevators shall not be...
-
A4.10.6 DOOR PROTECTIVE AND REOPENING DEVICE
The required door reopening device would hold the door open for 20 seconds if the doorway remains unobstructed. After 20 seconds, the door may begin to close. However, if designed in...
-
11B-411.1 General
Destination-oriented elevators shall comply with Section 11B-411 and with ASME A17.1. They shall be passenger elevators as classified by ASME A17.1. Elevator operation shall be...
-
11B-810.9 Escalators
Where provided, escalators shall comply with the sections 6.1.3.5.6 and 6.1.3.6.5 of ASME A17.1 and shall have a clear width of 32 inches (813 mm) minimum. Exception: Existing...
-
11B-810.9 Escalators
Where provided, escalators shall comply with the sections 6.1.3.5.6 and 6.1.3.6.5 of ASME A17.1 and shall have a clear width of 32 inches (813 mm) minimum. Exception: Existing...
-
11B-411.1 General
Destination-oriented elevators shall comply with Section 11B-411 and with ASME A17.1. They shall be passenger elevators as classified by ASME A17.1. Elevator operation shall be...
-
C201.3 Access to Functionality
Manufacturers shall ensure that telecommunications equipment and customer premises equipment is accessible to and usable by individuals with disabilities by providing direct access to all...
-
4.10.1 GENERAL
Accessible elevators shall be on an accessible route and shall comply with 4.10 and with the American National Standard Safety Code for Elevators, Dumbwaiters, Escalators, and Moving Walks...
-
TTY AND RELAY SERVICES
nondisabled person would have access to a telephone, officers must provide persons who are deaf or hard of hearing the opportunity to place calls using a teletypewriter (TTY, also known as a telecommunications...