2. Swinging doors shall provide a net clear opening width of not less than 32 inches (813 mm), measured with the door or doors positioned at an angle of 90 degrees from the...
Search Results "Interior Stair"
Filters
Commonly Searched Documents
-
1132A.3, Item 2
-
1132A.3, Item 3
3. Swinging doors shall be capable of opening at least 90 degrees.
-
1132A.3, Item 5
5. A pair of doors, manual or automatic, must have at least one leaf which provides a clear width of not less than 32 inches (813 mm), measured with the door positioned at an angle...
-
1132A.3, Item 2
2. Swinging doors shall provide a net clear opening width of not less than 32 inches (813 mm), measured with the door or doors positioned at an angle of 90 degrees from the closed...
-
1132A.5.1 General
Maneuvering clearances at interior doors shall provide a minimum length on both sides of the door of at least 42 inches (1067 mm) measured at a right angle to the plane of the door in its...
-
John Brabyn, Ph.D., Director of Rehabilitation Engineering Research, Center on Low Vision and Blindness (NIDRR), Smith-Kettlewell Eye Research Institute
Building Sight: A handbook of building and interior design solutions to include the needs of visually impaired people....
-
Cross Section: ADA Standard Section 505.7
Section 505.7 covers the current ADA Standards for the cross section of handrail gripping surfaces.
-
11B-505.7 Cross section
Handrail gripping surfaces shall have a cross section complying with Section 11B-505.7.1 or 11B-505.7.2.
-
11B-504.2 Treads and risers
All steps on a flight of stairs shall have uniform riser heights and uniform tread depths. Risers shall be 4 inches (102 mm) high minimum and 7 inches (178 mm) high maximum....
-
11B-504.2 Treads and risers
All steps on a flight of stairs shall have uniform riser heights and uniform tread depths. Risers shall be 4 inches (102 mm) high minimum and 7 inches (178 mm) high maximum....
-
11B-504.2 Treads and risers
All steps on a flight of stairs shall have uniform riser heights and uniform tread depths. Risers shall be 4 inches (102 mm) high minimum and 7 inches (178 mm) high maximum....
-
H2O Innovations AQUA STEP ADA
• Safety Side Guards - Optional safety side guards are available to prevent swimming under the stairs....
-
Kee Safety Inc. ADA Safety Handrail Components
ADA Safety Handrail Components Kee® Access Railing System was designed specifically to equip architects, engineers, specifiers, builders, and contractors with the components...
-
Nora Systems, Inc. Norament 920 Stairtreads
Floor covering that meets special fire requirements. Rubber stairtread for your fire safe exit. Meets class "A" (ASTM E 84 Tunnel Test) flame spread rate less than 15 and...
-
505.2 Where Required
Handrails shall be provided on both sides of stairs and ramps....
-
505.2 Where Required
Handrails shall be provided on both sides of stairs and ramps....
-
505.2 Where Required
Handrails shall be provided on both sides of stairs and ramps....
-
11B-504.3 Open risers
Open risers are not permitted. Exceptions: 1. On exterior stairways, an opening of not more than ½ inch (12.7 mm) may be permitted between the base of the riser and the...
-
11B-504.3 Open risers
Open risers are not permitted. Exceptions: 1. On exterior stairways, an opening of not more than ½ inch (12.7 mm) may be permitted between the base of the riser and the...
-
11B-504.3 Open risers
Open risers are not permitted. Exceptions: On exterior stairways, an opening of not more than ½ inch (12.7 mm) may be permitted between the base of the riser and the...
-
505.2 Where Required
Handrails shall be provided on both sides of stairs and ramps....
-
Signage
Comment by [Participant]: Perhaps incorporating those pictograms into the wayfinding to get you to those place, not just the sign identifying to the stair or the restroom....
-
AquaTrek2 ADA Step System
Risers 7” Maximum Riser Height 12” Minimum Tread Depth 24” Maximum Width Between Handrails Top Landing Handrail Extensions Top Railing at 35” Above Stair...
