Floor or ground surfaces of ramp runs shall comply with Section 11B-302. Changes in level other than the running slope and cross slope are not permitted on ramp runs....
Search Results "Curb Ramp Surface"
Commonly Searched Documents
- 
    
  
  11B-405.4 Floor or ground surfaces
  
- 
    
  
  11B-405.4 Floor or ground surfaces
  Floor or ground surfaces of ramp runs shall comply with Section 11B-302. Changes in level other than the running slope and cross slope are not permitted on ramp runs.... 
- 
    
  
  Governmental Units Affected (R208 Detectable Warning Surfaces) (Section-by-Section Analysis)
  UFAS did not contain a requirement for detectable warning surfaces on curb ramps. The Access Board is not aware of any state or local transportation departments that use UFAS.... 
- 
    
  
  Access and Construction Database
  Access and Construction Database - The settlement shall include the implementation of sidewalk and curb ramp asset management system.... 
- 
    
  
  DSA Drawing 11B-406-1 Perpendicular Curb next to a Curb and Gutter (2016 CBC)
  Requires the Premium User plan or above. (Login or upgrade your account!)
- Figure 406.6 Diagonal or Corner Type Curb Ramps – Drawing from the U.S. Access Board
- 
    
  
  1015.3 Height
  Required guards shall not be less than 42 inches (1067 mm) high, measured vertically as follows: From the adjacent walking surfaces.... 
- 
    
  
  R304.5.1 Width
  The clear width of curb ramp runs (excluding any flared sides), blended transitions, and turning spaces shall be 1.2 m (4.0 ft) minimum.... 
- 
    
  
  DSA Drawing 11B-406-10C Curb Ramp Adjoining a Parking Access Aisle with No Gutter (2016 CBC)
  Requires the Premium User plan or above. (Login or upgrade your account!)
- 
    
  
  Tread Surface: ADA Standard Section 504.4
  Section 504.4 covers the current ADA Standards for the tread surfaces on stairways. 
- 
    
  
  R304.2.1 Turning Space
  A turning space 1.2 m (4.0 ft) minimum by 1.2 m (4.0 ft) minimum shall be provided at the top of the curb ramp and shall be permitted to overlap other turning spaces and clear spaces.... 
- 
    
  
  Floor or Ground Surface: ADA Standard Section 404.2.4.4
  Section 404.2.4.4 covers the current ADA Standards for floor or ground surfaces at door maneuvering clearances. 
- Designing Sidewalks and Trails for Access, Part I of II: Review of Existing Guidelines and Practices
- 
    
  
  405.9.1 Extended Floor or Ground Surface
  The floor or ground surface of the ramp run or landing shall extend 12 inches (305 mm) minimum beyond the inside face of a handrail complying with 505.... 
- 
    
  
  405.9.1 Extended Floor or Ground Surface
  The floor or ground surface of the ramp run or landing shall extend 12 inches (305 mm) minimum beyond the inside face of a handrail complying with 505.... 
- 
    
  
  405.9.1 Extended Floor or Ground Surface
  405.9.1 Extended Floor or Ground Surface.... 
- 
    
  
  9 [§ 4.7.5]
  9 [§ 4.7.5] Curb ramps either have flared sides or vertical edges called returned curbs.... 
- 
    
  
  R304.3.1 Turning Space
  A turning space 1.2 m (4.0 ft) minimum by 1.2 m (4.0 ft) minimum shall be provided at the bottom of the curb ramp and shall be permitted to overlap other turning spaces and clear spaces.... 
- M-D Building Products, Inc. GEN3 SmartTool™ Digital Level
- 
    
  
  Curb Ramps at Intersections
  Curb ramps at marked crossings must be wholly contained within the crosswalk, excluding side flares.... 
- 
    
  
  3 [§ 4.3.7]
  3 [§ 4.3.7] The cross slope of the curb ramp is perpendicular to the running slope. Unlike the running slope, which runs along the ramp, the cross slope is measured across the ramp.... 
- 
    
  
  Q12: Full-depth Pavement Patching
  ramps.... 
- 
    
  
  Islands [§406.7]
  Islands [§406.7] A 48” min. long separation is necessary between curb ramps so that people using wheelchairs can clear one ramp before negotiating the next.... 
- 
    
  
  11B-406.1 General
  Curb ramps, blended transitions and islands on accessible routes shall comply with Section 11B-406.... 
