The uppercase letter “I” shall be used to determine the allowable stroke width of all low resolution VMS characters of a font....
Search Results "Compartment Width"
Commonly Searched Documents
-
11B-703.8.6 Stroke width
-
1009.2.5 Seat Width
The seat shall be 16 inches (405 mm) wide minimum.
-
1009.2.5 Seat Width
The seat shall be 16 inches (405 mm) wide minimum.
- Amramp Wheelchair Ramps and Mobility Solutions
-
End-of-Row Stalls
End-of-Row Stalls The design of end-of-row stalls incorporates aisle space into the stall for easier maneuvering; consider this design even where a stall is not located at the...
-
Clear Width [§405.5]
Clear Width [§405.5] Ramp runs must have a clear width of 36” minimum (measured between handrails where provided)....
-
4.3.5.1 90-Degree Turn
The width of circulation spaces should be wider to accommodate two-way traffic and egress requirements....
-
A. Door Width
Door Width....
-
Handrails: ADA Standard Section 1009.3.3
The clear width between required handrails shall be 33 inches (840 mm) minimum and 38 inches (965 mm) maximum. EXCEPTIONS: 1....
-
11B-604.9 Water closets and toilet compartments for children's use
Water closets and toilet compartments for children's use shall comply with Section 11B-604.9....
-
604 Water Closets and Toilet Compartments
[See subsections ...]
-
604 Water Closets and Toilet Compartments
[See subsections ...]
-
A4.2.1(2) Space Requirements for Use of Walking Aids
Although people who use walking aids can maneuver through clear width openings of 32 in (815 mm), they need 36 in (915 mm) wide passageways and walks for comfortable gaits....
-
A4.2.1(2) Space Requirements for Use of Walking Aids
Although people who use walking aids can maneuver through clear width openings of 32 in (815 mm), they need 36 in (915 mm) wide passageways and walks for comfortable gaits....
-
11B-403.5.1 Clear width
The clear width shall be permitted to be reduced to 32 inches (813 mm) minimum for a length of 24 inches (610 mm) maximum provided that reduced width segments are separated by segments that...
-
11B-403.5.1 Clear width
Exceptions: The clear width shall be permitted to be reduced to 32 inches (813 mm) minimum for a length of 24 inches (610 mm) maximum provided that reduced width segments are separated...
-
Clear Width and Vertical Clearance of Doors and Gates [§404.2.3]
Clear Width and Vertical Clearance of Doors and Gates [§404.2.3]...
-
404.3.1 Clear Width
404.3.1 Clear Width. Doorways shall provide a clear opening of 32 inches (815 mm) minimum in power-on and power-off mode....
-
Caution regarding minimum Aisle Widths for aisles that serve "elements on both sides"
As a heads up, care should be taken in applying the technical aspects of 11B-403.5.1, Exception 4 re: minimum aisle width in California....
-
3.3.10 90-Degree Turn
The width required for all participants to complete a 90-degree turn in our sample was much smaller than the UDI findings (Figure 3‒10), due to differences in the abilities of people or/...
-
11B-403.5.1 Clear width
The clear width shall be permitted to be reduced to 32 inches (813 mm) minimum for a length of 24 inches (610 mm) maximum provided that reduced width segments are separated by segments that...
-
Accessible Lavatory
Editorial changes made to scoping provisions in 213.3 for plumbed fixtures and accessories include: removing as unnecessary the distinction between toilet compartments and toilet...
-
§ 38.113(a) Clear width
(a) Clear width....
-
General
A commenter recommended that more than one wheelchair accessible compartment be provided in toilet rooms serving airports and train stations because these compartments are likely to be occupied...