be installed in a horizontal position, 33 inches (838 mm) minimum and 36 inches (914 mm) maximum above the finish floor measured to the top of the gripping surface, except that at water closets...
Search Results "Closet"
-
11B-609.4 Position of grab bars
-
604.5.1 Side Wall
Figure 604.5.1 Side Wall Grab Bar at Water Closets...
-
604.5.1 Side Wall
[ECTCR UFAS 4.17.6, Fig. 30(a), Fig. 30(d)] Figure 604.5.1 Side Wall Grab Bar at Water Closets...
-
11B-809.10.7.5 Controls
Controls shall be mounted 44 inches (1118 mm) maximum above the finish floor. The force required to activate controls shall be 5 pounds (22.2 mm) maximum.
-
11B-809.10.7.5 Controls
Controls shall be mounted 44 inches (1118 mm) maximum above the finish floor. The force required to activate controls shall be 5 pounds (22.2 mm) maximum.
-
Unisex (Single-Use or Family) Toilet and Unisex Bathing Rooms: ADA Standard Section 213.2.1
Section 213.2.1 covers scoping requirements in the current ADA Standards for unisex (single-use or family) toilet and unisex bathing rooms.
-
Fixtures
Fixtures TAS 604.3.2 also allows the clear floor space and clearances required at other “fixtures” to overlap the water closet clearance....
-
11B-213.2.1 Unisex (single-user or family) toilet and unisex (single-user or family) bathing rooms
Unisex (single-user or family) toilet rooms shall contain not more than one lavatory, and not more than two water closets without urinals or one water closet and one urinal....
-
11B-213.2.1 Unisex (single-user or family) toilet and unisex (single-user or family) bathing rooms
Unisex (single-user or family) toilet rooms shall contain not more than one lavatory, and not more than two water closets without urinals or one water closet and one urinal....
-
6. Clear floor space
6. Clear floor space: Adequate space is provided to approach the toilet from a variety of wheelchair transfer positions (i.e. diagonal or side approaches). Generally, the toilet...
-
4. Toilet seat height
4. Toilet seat height: The toilet seat needs to be from 17 to 19 inches above the floor to permit transfers to and from wheelchairs.
-
Note
Note: In every instance, regardless of toilet and lavatory configuration, adequate space needs to be provided for inmates who use wheelchairs to transfer onto and off of the...
-
M8
M8. Is there at least 18 inches between the center of the toilet and the side of the adjacent lavatory? [ADA Standards § 4.16.2; Fig. 28] Yes No
-
A4.16.3 Height
Height preferences for toilet seats vary considerably among disabled people. Higher seat heights may be an advantage to some ambulatory disabled people, but are often a disadvantage...
-
A4.16.3 HEIGHT
Preferences for toilet seat heights vary considerably among disabled people. Higher seat heights may be an advantage to some ambulatory disabled people but a disadvantage for...
-
5.3.3.1 Height
The total height of the toilet seat on the riser for a pit toilet shall be between 17 inches (430 mm) and 19 inches (485 mm) above the floor or ground surface.
-
Length
Length. Whereas none of the respondents specifically addressed the issue of grab bar length, drawings submitted clearly indicate that many of the alternate swing away grab bars were...
-
Delta Round Front Toilet C41901-WH
Product Features and Benefits Delta toilets feature the exclusive SmartFit tank-to-bowl connection reducing potential leak points, over-tightening of the fasteners and cracking...
-
American Standard Baby Devoro 1.28 gpf FloWise 10 Inch High Round Front Toilet
We've been producing some of the industries best commercial toilets for more than 137 years. Built to stand the test of time and handle years of high use, there is an American...
-
Willoughby Industries ETW-1445-BS-HC Toilet for 45-degree Chase Wall
450 chase, wall outlet, blowout toilet shall be: Willoughby Model No. ETW-1445-___...-BS-HC. Fixture shall be fabricated from 14 gauge, type 304 stainless steel. The construction...
-
Neo-Metro Commercial Metaal Toilet 8956 Series
Neo-Metro's Metaal Toilet features an elongated toilet bowl and a unique decorative exposed trap. This version of the toilet is configured for a commercial flush valve. Either a...
-
Neo-Metro Metaal Toilet Configured for In-Wall Flushing System
Neo-Metro's Metaal Toilet features an elongated toilet bowl and unique decoratiive exposed trap. This toilet uses a customer supplied European style In-Wall Flushing...
-
Kohler Veil™ One-Piece Elongated Dual-Flush Wall-Hung Toilet With Reveal® Quiet-Close™ Seat
Veil™ The Veil wall-hung toilet saves up to 12 inches of precious bathroom space over KOHLER's longest floor-mount models. The mounting hardware is completely concealed, giving...
-
Neo-Metro Euro-Urban Toilet Configured for In-Wall Flushing System
The Euro-Urban Contour toilet is a classic European style toilet, available in an elongated style and can be mounted either on-the-floor or off-the-floor for ease of...
