Elevator assignment characters shall be 1 inch high (25 mm) minimum.
Search Results "Closer Height"
-
11B-411.2.1.2.4.2 Size
-
a. Transfer Surface Adjustability
The Board considered it likely that diagnostic equipment would be adjustable in height to serve practitioners’ needs however, the transfer surface could be fixed within the proposed height...
-
TownSteel TDC 85 ALUMINUM Grade 1 Door Closer
TDC 85 Door Closer is ANSI/BHMA certified heavy duty Grade 1 with aluminum body, and UL 10C 3-hour rated....
-
Figure 904.3.2 Check-Out Aisle Counters – Drawing from the U.S. Access Board
-
Yale 5800 Series Cast Iron Door Closer
Yale® 5800 series cast iron door closers are ideal for commercial applications where ease of use, installation and aesthetics are required at an economical price.  ...
-
A4.32.4 Height of Tables or Counters
A4.32.4 Height of Tables or Counters. Different types of work require different table or counter heights for comfort and optimal performance....
-
11B-604.4 Seats
The seat height of a water closet above the finish floor shall be 17 inches (432 mm) minimum and 19 inches (483 mm) maximum measured to the top of the seat....
-
11B-604.4 Seats
The seat height of a water closet above the finish floor shall be 17 inches (432 mm) minimum and 19 inches (483 mm) maximum measured to the top of the seat....
-
Line Spacing: ADA Standard Section 703.2.8
Spacing between the baselines of separate lines of raised characters within a message shall be 135 percent minimum and 170 percent maximum of the raised character height....
-
11B-703.2.8 Line spacing
Spacing between the baselines of separate lines of raised characters within a message shall be 135 percent minimum and 170 percent maximum of the raised character height....
-
11B-703.2.8 Line spacing
Spacing between the baselines of separate lines of raised characters within a message shall be 135 percent minimum and 170 percent maximum of the raised character height....
-
A4.32.4 HEIGHT OF WORK SURFACES
Heavy manual work such as rolling dough requires a work surface height about 10 in (255 mm) below elbow height for a standing person....
-
19 Inch Low Height
Figure 2: Illustration of the height difference between a fixed height and adjustable height medical table Implications of a 19 Inch Minimum Standard for the Highest Point in the Lowest...
-
TownSteel TDC 90 ALUMINUM Grade 1 Door Closer
TDC 90 Door Closer is ANSI/BHMA certified heavy duty Grade 1 with aluminum body. Slim line cover with a dust cap to conceal the open pinion....
-
TownSteel TDC 70 ALUMINUM Grade 1 Door Closer
TDC 70 Door Closer is ANSI/BHMA certified heavy duty Grade 1 with aluminum body, and UL 10C 3-hour rated....
-
18 Inch Low Height
18 Inch Low Height As our discussions progressed on the low height, whether it should be 17 inches, 18 inches or 19 inches; a compromise position of 18 inches was suggested....
-
Norton Surface Mounted Medium Duty 8000 Series Door Closer
The 8000 Series Door Closers offer the ideal combination of appearance, reliability and durability in today's market....
-
17 Inch Low Height
17 Inch Low Height A portion of the Committee maintained that a height range of 17 inches - 25 inches would accommodate a significant portion of people with disabilities....
-
5.1.5 Floor Height
Where the floor at the entrance to the camp shelter is elevated above the ground surface, the floor shall be 17 (430 mm) high minimum to 19 inches (485 mm) high maximum measured from...
-
4.19.2 Height and Clearances
Lavatories shall be mounted with the rim or counter surface no higher than 34 in (865 mm) above the finish floor. Provide a clearance of at least 29 in (735 mm) above the finish...
-
4.19.2 HEIGHT AND CLEARANCES
Lavatories shall be mounted with the rim or counter surface no higher than 34 in (865 mm) above the finished floor. Provide a clearance of at least 29 in (735 mm) from the floor to...
-
602.4 Spout Height
602.4 Spout Height. Spout outlets shall be 36 inches (915 mm) maximum above the finish floor or ground....
-
TownSteel TDC 40, CAST IRON Grade 1 Door Closer
TDC 40 Door Closer is ANSI/BHMA certified heavy duty Grade 1, and UL 10C 3-hour rated. It's designed for new or retrofit LCN 4040 applications....
-
11B-902.4.2 Height
The tops of tables and counters shall be 26 inches (660 mm) minimum and 30 inches (762 mm) maximum above the finish floor or ground.
