Changes in level between 1/4 inch (6.4 mm) high minimum and 1/2 inch (13 mm) high maximum shall be beveled with a slope not steeper than 1:2. Advisory 303.3 Beveled....
Search Results "Change Machine"
Filters
Commonly Searched Documents
-
303.3 Beveled
-
303.2 Vertical
Changes in level of ¼ inch (6.4 mm) high maximum shall be permitted to be vertical. Figure 303.2 Vertical Change in Level...
-
11B-303.3 Beveled
A change in level of 1/2 inch (13 mm) is permitted to be 1/4 inch (6.4 mm) vertical plus 1/4 inch (6.4 mm) beveled....
-
General Preamble
General Preamble Purpose This guideline provides requirements for accessibility, usability, and compatibility of Information / Transaction Machines (ITMs)....
-
11B-303.2 Vertical
Changes in level of ¼ inch (6.4 mm) high maximum shall be permitted to be vertical and without edge treatment. [2010 ADAS] 303.2 Vertical. ...
-
11B-303.2 Vertical
Changes in level of ¼ inch (6.4 mm) high maximum shall be permitted to be vertical and without edge treatment. [2010 ADA Standards] 303.2 Vertical....
-
11B-813.2 Features
Adult changing facilities shall provide features in compliance with Section 11B-813.2....
-
303.2 Vertical
Changes in level of 1/4 inch (6.4 mm) high maximum shall be permitted to be vertical....
-
303.4 Ramps
Changes in level greater than ½ inch (13 mm) high shall be ramped, and shall comply with 405 or 406....
-
303.4 Ramps
Changes in level greater than 1/2 inch (13 mm) high shall be ramped, and shall comply with 405 or 406....
-
303.4 Ramps
Changes in level greater than ½ inch (13 mm) high shall be ramped, and shall comply with 405 or 406....
-
11B-303.4 Ramps
Changes in level greater than ½ inch (12.7 mm) high shall be ramped, and shall comply with Section 11B-405 or 11B-406....
-
11B-303.4 Ramps
Changes in level greater than ½ inch (12.7 mm) high shall be ramped, and shall comply with Section 11B-405 or 11B-406....
-
11B-303.4 Ramps
Changes in level greater than ½ inch (12.7 mm) high shall be ramped, and shall comply with Section 11B-405 or 11B-406....
-
707.6 Input
707.6 Input. Input devices shall comply with 707.6.
-
F214.1 General
Where provided, washing machines and clothes dryers shall comply with F214....
-
4.1.3(20)
(20) Where automated teller machines (ATMs) are provided, each ATM shall comply with the requirements of 4.34 except where two or more are provided at a location, then only one must comply...
-
ATM Clear Floor or Ground Space
In the final rule, the Board revised these exceptions to cover fare machines as well. Comment....
-
Where Ramps and Curb Ramps are Required [§303.4]
Where Ramps and Curb Ramps are Required [§303.4] Ramps and curb ramps are required along accessible routes to span changes in level greater than ½”....
-
707.1 General
Automatic teller machines and fare machines shall comply with 707. Advisory 707.1 General....
-
707.1 General
Automatic teller machines and fare machines shall comply with 707. Advisory 707.1 General....
-
707.1 General
Automatic teller machines and fare machines shall comply with 707. Advisory 707.1 General....
-
611.4 Height
Top loading machines shall have the door to the laundry compartment located 36 inches (915 mm) maximum above the finish floor....
-
11B-611.4 Height
Top loading machines shall have the door to the laundry compartment located 36 inches (914 mm) maximum above the finish floor....