Doorways shall have a minimum clear opening of 32 in (815 mm) with the door open 90 degrees, measured between the face of the door and the opposite stop (see Fig. 24(a), (b), (c), and (d...
Search Results "Regarded as Having an Impairment"
-
4.13.5 Clear Width
-
4.8.4 LANDINGS
Ramps shall have level landings at the bottom and top of each run. Landings shall have the following features: (1) The landing shall be at least as wide as the ramp run leading to it...
-
4.15.5(1)
(1) Wall- and post-mounted cantilevered units shall have a clear knee space between the bottom of the apron and the floor or ground at least 27 in (685 mm) high, 30 in (760 mm) wide, and...
-
Speaking/Communicating
Speaking/Communicating: Individuals with ASD may have difficulty communicating with co-workers or supervisors....
-
Activation button
They suggested it should have a label, be larger, have better color contrast from the panel background so it is more visible, and be mounted higher although one person thought the height...
-
§ 38.159(b)(1) Design load
Working parts, such as cables, pulleys, and shafts, which can be expected to wear, and upon which the lift depends for support of the load, shall have a safety factor of at least six, based...
-
404.1 General
Security personnel must have sole control of doors that are eligible for the Exception at 404.1....
-
404.1 General
Security personnel must have sole control of doors that are eligible for the Exception at 404.1....
-
Why Are Adidas Chinese New Year Jackets So Popular?
I have noticed that Adidas Chinese New Year jackets have come a major trend among streetwear suckers....
-
11B-1009.5.5 Surface
The surface of the transfer system shall not be sharp and shall have rounded edges....
-
11B-1009.4.4 Surface
Surfaces of transfer walls shall not be sharp and shall have rounded edges....
-
1009.4.4 Surface
Surfaces of transfer walls shall not be sharp and shall have rounded edges....
-
M305.2.4 Cross Section
Transfer supports shall have a cross section complying with 305.2.4.1 or 305.2.4.2....
-
609.2 Cross Section
Grab bars shall have a cross section complying with 609.2.1 or 609.2.2....
-
1009.5.5 Surface
The surface of the transfer system shall not be sharp and shall have rounded edges....
-
E103.4 Defined Terms
For the purpose of the 508 Standards, the terms defined in E103.4 have the indicated meaning....
-
C103.4 Defined Terms
For the purpose of the 255 Guidelines, the terms defined in C103.4 have the indicated meaning....
-
609.2 Cross Section
Grab bars shall have a cross section complying with 609.2.1 or 609.2.2....
-
3.5 DEFINITIONS
The following terms shall, for the purpose of these standards, have the meaning indicated in this section....
-
4.31.6 CONTROLS
Telephones shall have pushbutton controls where service for such equipment is available....
-
11B-1009.4.4 Surface
Surfaces of transfer walls shall not be sharp and shall have rounded edges....
-
11B-1009.5.5 Surface
The surface of the transfer system shall not be sharp and shall have rounded edges....
-
11B-1009.5.5 Surface
The surface of the transfer system shall not be sharp and shall have rounded edges....
-
11B-813.2.11 Privacy latch
Each door to adult changing facilities shall have a privacy latch....