Transfer supports shall not rotate within their fittings.
Search Results "Mobility Aid Seating Location"
-
M305.2.3 Fittings
-
Location at Marked Crossings [4.7.9]
At corners with a large radius, perpendicular curb ramps should be located so that the centerline is radial to the curb face instead of being in line with the crosswalk direction....
-
11B-1009.2.1 Pool lift location
Pool lifts shall be located where the water level is 36 inches (914 mm) minimum and 48 inches (1219 mm) maximum. [2010 ADAS] 1009.2.1 Pool Lift Location. ...
-
11B-1009.2.1 Pool lift location
Pool lifts shall be located where the water level is 36 inches (914 mm) minimum and 48 inches (1219 mm) maximum. [2010 ADAS] 1009.2.1 Pool Lift Location....
-
Sloped Entries: ADA Standard Section 1009.3
Personal wheelchairs and mobility devices may not be appropriate for submerging in water....
-
Does the ADA also prohibit State and local governments from discriminating against persons with HIV or AIDS?
Does the ADA also prohibit State and local governments from discriminating against persons with HIV or AIDS? Yes....
-
§ 38.29(e)
For vehicles in excess of 22 feet in length with front-door lifts or ramps, vertical stanchions immediately behind the driver shall either terminate at the lower edge of the aisle-facing seats...
-
11B-805.3.1 Wheelchair spaces
Where seating is provided in waiting rooms, at least 5 percent of the seating shall be wheelchair spaces complying with Section 11B-802.1....
-
11B-805.3.1 Wheelchair spaces
Where seating is provided in waiting rooms, at least 5 percent of the seating shall be wheelchair spaces complying with Section 11B-802.1....
-
11B-1009.2.1 Pool lift location
Pool lifts shall be located where the water level is 36 inches (914 mm) minimum and 48 inches (1219 mm) maximum. [2010 ADA Standards] 1009.2.1 Pool Lift Location....
-
Locating Qualified Individuals with Disabilities
Locating Qualified Individuals with Disabilities There are many resources for locating individuals with disabilities who are qualified for different types of jobs....
-
SciFit PRO1000 - Seated Upper Body Machine
accessibility Bi-directional exercise Iso-Strength safe, accommodating strength program Very low starting resistance with 191 levels of resistance Premium, standard and bariatric seat...
-
11B-221.2.1.1 General seating
TABLE 11B-221.2.1.1 NUMBER OF WHEELCHAIR SPACES IN ASSEMBLY AREAS NUMBER OF SEATS MINIMUM NUMBER OF REQUIRED WHEELCHAIR SPACES...
-
11B-221.2.1.1 General seating
TABLE 11B-221.2.1.1 NUMBER OF WHEELCHAIR SPACES IN ASSEMBLY AREAS Number Of Seats Minimum Number Of Required Wheelchair Spaces 4 to 25 1...
-
11B-221.2.1.1 General seating
TABLE 11B-221.2.1.1 NUMBER OF WHEELCHAIR SPACES IN ASSEMBLY AREAS NUMBER OF SEATS MINIMUM NUMBER OF REQUIRED WHEELCHAIR SPACES...
-
11B-1009.3 Sloped entries
Personal wheelchairs and mobility devices may not be appropriate for submerging in water....
-
11B-1009.3 Sloped entries
Personal wheelchairs and mobility devices may not be appropriate for submerging in water....
-
Rehabilitation and Outpatient Physical Therapy Facilities [§208.2.2]
Outpatient Physical Therapy Facilities [§208.2.2] At least 20% of patient and visitor parking spaces must be accessible at outpatient physical therapy facilities (including those not located...
-
A4.33.7 TYPES OF LISTENING SYSTEMS
A listening system that can be used from any seat in a seating area is the most flexible way to meet this specification....
-
APPENDIX E - SEATING PLANS FOR MODIFIED THEATERS
APPENDIX E SEATING PLANS FOR MODIFIED THEATERS...
-
M305.2.4 Cross Section
Transfer supports shall have a cross section complying with 305.2.4.1 or 305.2.4.2.
-
M305.2.3 Height
During use, the tops of transfer support gripping surfaces shall be 6 inches (150 mm) minimum and 19 inches (485 mm) maximum higher than the top of the associated uncompressed...
-
M305.2.6 Gripping Surface
Transfer support gripping surfaces shall be continuous along their length and shall not be obstructed along their tops or sides. The bottoms of transfer support gripping surfaces...
