Seat width and depth: ADA-ABA currently requires a minimum entry point of 24 inches for transfer steps in play (Section 1008.3.1.1) [7] and pool areas (Section 1009.4.5) [7]. ...
Search Results "ADA Compliance"
-
Seat width and depth
-
11B-607.4 Grab bars
[2010 ADA Standards] 607.4 Grab Bars. Grab bars for bathtubs shall comply with 609 and shall be provided in accordance with 607.4.1 or 607.4.2. Exceptions: 1. Reserved....
-
11B-405.5 Clear width
[2010 ADA Standards] 405.5 Clear Width. The clear width of a ramp run and, where handrails are provided, the clear width between handrails shall be 36 inches (915 mm) minimum....
-
11B-216.9.2 Directional signs
[2010 ADA Standards] 216.9.2 Directional Signs....
-
ALTERATION
ETA Editor's Note ADA Title III §36.402(b)(1) also excludes asbestos removal from the definition of Alteration, unless it affects the usability of the building or facility: §36.402...
-
11B-208.1 General
[2010 ADA Standards] EXCEPTION: Parking spaces used exclusively for buses, trucks, other delivery vehicles, law enforcement vehicles, or vehicular impound shall not be required to comply...
-
11B-405.2 Slope
[2010 ADA Standards] EXCEPTION: In existing sites, buildings, and facilities, ramps shall be permitted to have running slopes steeper than 1:12 complying with Table 405.2 where such...
-
ALTERATION
ETA Editor's Note ADA Title III §36.402(b)(1) also excludes asbestos removal from the definition of Alteration, unless it affects the usability of the building or facility: §36.402...
-
11B-607.4 Grab bars
[2010 ADA Standards] 607.4 Grab Bars. Grab bars for bathtubs shall comply with 609 and shall be provided in accordance with 607.4.1 or 607.4.2. Exceptions: 1. Reserved....
-
11B-405.5 Clear width
[2010 ADA Standards] 405.5 Clear Width. The clear width of a ramp run and, where handrails are provided, the clear width between handrails shall be 36 inches (915 mm) minimum....
-
11B-405.2 Slope
[2010 ADA Standards] EXCEPTION: In existing sites, buildings, and facilities, ramps shall be permitted to have running slopes steeper than 1:12 complying with Table 405.2 where such...
-
11B-216.9.2 Directional signs
[2010 ADA Standards] 216.9.2 Directional Signs....
-
11B-208.1 General
[2010 ADA Standards] EXCEPTION: Parking spaces used exclusively for buses, trucks, other delivery vehicles, law enforcement vehicles, or vehicular impound shall not be required to comply...
-
11B-216.13.1 Use of Cleaner Air Symbol
including concessionaires, comply with the conditions of use identified in Section 11B-216.13.3, a Cleaner Air Symbol complying with Section 11B-703.7.2.5 is permitted to be posted in compliance...
-
5. Site Constraints, Technical Infeasibility, and Unusually Expensive Remediation
Locations at which site constraints make compliance with applicable design standards impracticable may be made compliant with the standards to the maximum extent feasible....
-
403.5.2 Clear Width at Turn
EXCEPTION: Where the clear width at the turn is 60 inches (1525 mm) minimum compliance with 403.5.2 shall not be required. ...
-
Carrier Programs
[Sec. 382.63(a)] The program must include: (i) a training schedule for training carrier personnel on compliance; and (ii) the carrier’s policies and procedures for accommodating individuals...
-
4.1.6(1)(d)
If stair modifications to correct unsafe conditions are required by other codes, the modifications shall be done in compliance with these guidelines unless technically infeasible....
-
1015.1 General
In alterations, when an entity determines that a condition in 1019 does not permit full compliance with a specific provision in 1015, the viewing area is permitted to comply with the provision...
-
4.5.1 General
In alterations, where a condition for exception in section 1.1 prohibits full compliance with a specific requirement for clear floor or ground space surface, slope, size, or location, the...
-
What constitutes a “passenger loading zone”?
At other locations, compliance is not required even if passenger loading may occasionally occur, but is not specifically intended or reflected in the design....
-
Section 36.101 Purpose (Section-By-Section Analysis and Response to Comments)
prohibits discrimination on the basis of disability by public accommodations, requires places of public accommodation and commercial facilities to be designed, constructed, and altered in compliance...
-
II. Overview of Requirements
undertaking alterations, alter existing facilities in accordance with the Americans with Disabilities Act Accessibility Guidelines issued by the Architectural and Transportation Barriers Compliance...
-
104.1.1 Construction and Manufacturing Tolerances
ETA Editor’s Note: For additional information go to ADA Tolerances - Additional Resources or keyword search "Tolerance."...