One commenter suggested a requirement that a sticker bearing the international symbol for accessibility be placed on the device or that some other identification be required to signal that...
Search Results "Safety Requirement"
Filters
Commonly Searched Documents
-
Inquiry into the use of other power-driven mobility device. (Section-by-Section Analysis)
-
Running Slope of Ramps Deployed to Roadways or Curb-Height Bus Stops
See 2010 NPRM, T303.8.1.7 The Board proposed these changes for two primary reasons: to address concerns about the safety and usability of ramps when deployed at the steepest maximum slope...
-
Receiver Jacks: ADA Standard Section 706.2
Receivers required for use with an assistive listening system shall include a 1/8 inch (3.2 mm) standard mono jack....
-
Entrances: ADA Standard Section 206.5.1
Section 206.5.1 covers scoping requirements in the most current ADA Standards for doors, doorways, and gates at entrances.
-
Wheelchair Spaces: ADA Standard Section 206.7.2
Section 206.7.2 covers scoping requirements in the most current ADA Standards for accessible routes to wheelchair spaces.
-
Side-Hinged Door Ovens: ADA Standard Section 804.6.5.1
Side-hinged door ovens shall have the work surface required by 804.3 positioned adjacent to the latch side of the oven door....
-
11B-706.2 Receiver jacks
Receivers required for use with an assistive listening system shall include a 1/8 inch (3.2 mm) standard mono jack....
-
11B-216.4.3 Directional signs
Signs required by Chapter 10, Section 1009.10 to provide directions to accessible means of egress shall comply with Section 11B-703.5....
-
POINT-OF-SALE DEVICE
[DSA-AC] A device used for the purchase of a good or service where a personal identification number (PIN), zip code or signature is required....
-
11B-224.6 Storage
Fixed or built-in storage facilities within guest rooms required to provide mobility features shall comply with Section 11B-225....
-
11B-223.1.1.3 Toilet and bathing facilities
Toilet/bathing rooms which are part of patient bedrooms added or altered and required to be accessible shall comply with Section 11B-805.2.4....
-
Allegion LCN 1460 Series Surface Mounted Door Control
Parallel arm, designated with a "P", closers include - 62PA Shoe required for parallel arm mount. 1460T mounts hinge side, top jamb (pull side) and stop face....
-
Guardian Barrier-Free WideArea™ Eye/Face Wash GBF1724
Profile of unit is “flattened” to comply with maximum height and knee clearance requirements....
-
Allegion Falcon T-Series Mechanical Locks
Features and Benefits Key-in-lever cylindrical locksets shall be Falcon Lock T Series or equal and meet the following requirements: All locks shall meet the new ANSI/BHMA...
-
Magnuson Group Wood Hospitality Coat Racks
Wall mounted coat racks are custom built to your length requirements. Choose from single shelf MC-HWA racks or from split level MC-HWA-2L ADA compliant racks....
-
1. Public Rights-of-Way
The guidelines cover the minimum scoping and technical requirements for various spaces and elements in the public right-of-way, such as pedestrian access routes, which ensure the accessibility...
-
G.6.vi. - May an agency shift the responsibility for making undue burden determinations to vendors (i.e., by requiring interested sources who offer EIT that meets the applicable technical provisions to explain why the purchase of such EIT would not impose an undue burden?
No. The responsibility for making an undue burden determination rests with the agency. Only the agency is in a position to determine the difficulty or expense acquisition of EIT that...
-
11B-233.1 General
ETA Editor's Note For residential facilities, the ADA scoping requirements are included for information. The CBC scoping requirements are more inclusive....
-
Installation: ADA Standard Section 609.7
Section 609.7 covers the current ADA Standards for the installations of grab bars.
-
Rooms and Spaces: ADA Standard Section 206.5.2
Section 206.5.2 covers scoping requirements in the most current ADA Standards for accessible routes to rooms and spaces.
-
Dispersion: ADA Standard Section 226.2
Section 226.2 covers scoping requirements in the current ADA Standards for dispersion of dining surfaces and work surfaces.
-
11B-609.7 Installation
Grab bars shall be installed in any manner that provides a gripping surface at the specified locations and that does not obstruct the required clear floor space....
-
11B-804.6.5.2 Bottom-hinged door ovens
Bottom-hinged door ovens shall have the work surface required by Section 11B-804.3 positioned adjacent to one side of the door....
-
Creating Accessible PDFs with Adobe Acrobat Professional
Background Section 508 of the Rehabilitation Act requires Federal agencies to make electronic and information technology (E&IT) accessible to users with disabilities, including:...
