The Partnership on Employment & Accessible Technology (PEAT) is a multi-faceted initiative promoting the employment, retention, and career advancement of people with disabilities through...
Search Results "Maintenance of Accessible Feature"
- Partnership on Employment & Accessible Technology (PEAT)
-
C201.5 Design, Development, and Fabrication
Telecommunications equipment manufacturers shall evaluate the accessibility, usability, and interoperability of ICT during its product design, development, and fabrication....
-
2. IMPROVING PHYSICAL ACCESS
Access issues that should be considered include:...
- Access Board: Automatic Door Controls
-
4.3.4 Passing Space
If an accessible route has less than 60 in (1525 mm) clear width, then passing spaces at least 60 in by 60 in (1525 mm by 1525 mm) shall be located at reasonable intervals not to exceed...
-
4.3.4 PASSING SPACE
If an accessible route has less than 60 in (1525 mm) clear width, then passing spaces at least 60 in by 60 in (1525 mm by 1525 mm) shall be located at reasonable intervals not to exceed...
-
After January 26, 1992
“Readily accessible to and usable by” means that the new or altered building must be built in strict compliance with either the ADA Standards for Accessible Design or UFAS....
-
4. Pressure Gauge
In general, if the operation of a door, a faucet, or other device requires more than 5 pounds of force, it is not accessible to many people with disabilities....
- Access Board: Accessible Bathing Facilities Scoping
-
K. Ambulatory Stall
If there are more than 5 stalls in any restroom, is there one stall in addition to the large accessible stall, that is 36" wide, has 2 parallel grab bars at 33"-36" off the floor and has...
-
233.3.3 Additions
Residential dwelling units required to comply with 233.3.1.1 shall be on an accessible route as required by 206....
- Virtuoso Portable Wheelchair Lift 5460P
-
Golf Facilities: ADA Standard Section 206.2.15
Section 206.2.15 covers scoping requirements in the most current ADA Standards for accessible routes to golf facilities
-
233.3.3 Additions
Residential dwelling units required to comply with 233.3.1.1 shall be on an accessible route as required by 206....
- Businesses Inspected by a CASp - from DSA
-
11B-411.2.1.5 Button requirements
Keypad buttons, the accessibility function button, and additional hall call console buttons shall comply with Section 11B-411.2.1.5....
-
11B-411.2.1.5 Button requirements
Keypad buttons, the accessibility function button, and additional hall call console buttons shall comply with Section 11B-411.2.1.5....
-
11B-215.4 Transient lodging
Guest rooms required to comply with Section 11B-224.4 shall provide fire alarms complying with Chapter 9, Section 907.5.2.3.3, and carbon monoxide alarms, where provided, complying...
-
9.3.2 Equivalent Facilitation
For purposes of this section, equivalent facilitation shall include the installation of electrical outlets (including outlets connected to a facility’s central alarm system) and...
-
11B-215.4 Transient lodging
Guest rooms required to comply with Section 11B-224.4 shall provide fire alarms complying with Chapter 9, Section 907.5.2.3.2, and carbon monoxide alarms, where provided, complying...
-
11B-215.4 Transient lodging
Guest rooms required to comply with Section 11B-224.4 shall provide fire alarms complying with Chapter 9, Section 907.5.2.3.2, and carbon monoxide alarms, where provided, complying...
-
11B-809.10.6.1 Size
When one or more shower stalls are provided within the same dwelling unit, as least one shower stall shall comply with one of the following: A transfer type shower...
-
11B-809.10.7.1 Floor space
The floor space at water closets shall be 48 inches (1219 mm) wide minimum measured perpendicular to the side wall. A floor space 48 inches (1219 mm) wide minimum by 36 inches (914...
-
11B-809.10.5.1 Clear floor space
A clear floor space 30 inches (762 mm) minimum by 48 inches (1219 mm) minimum shall be located with the long edge of the clear floor space parallel to the side of the bathtub or...