The surface of an accessible route shall comply with 4.5.
Search Results "Shower Clear Floor Space"
-
4.3.6 Surface Textures
-
4.3.6 SURFACE TEXTURES
The surface of an accessible route shall comply with 4.5.
-
§ 38.93(d) Coordination with boarding platform
(d) Coordination with boarding platform—
-
11B-809.7.1 Width
The clear width for the accessible route shall be 36 inches (914 mm) minimum. Exception: The clear width shall be permitted to be reduced to 32 inches (813 mm) minimum at doors....
-
T502.4 Doorways with Steps on Over-the-Road Buses
On over-the-road buses, doorways with steps shall provide an opening with a clear width of 30 inches (760 mm) minimum. Exceptions: 1....
-
11B-604.8.1.1.2 Maneuvering space with side-opening door
11B-604.8.1.1.2 Maneuvering space with side-opening door....
-
1002.4.4.2 Side Entry
The amount of clear space needed within the ride, and the size and position of the opening are interrelated....
-
1002.4.4.2 Side Entry
The amount of clear space needed within the ride, and the size and position of the opening are interrelated....
-
4.34.5.4(1) Floor space
(1) Floor space. Clear floor space at bathtubs shall be as shown in Fig. 33....
-
11B-604.8.1.1.2 Maneuvering space with side-opening door
accessible compartment with a door located in the side wall or partition, either in-swinging or out-swinging, a minimum 60 inches (1524 mm) wide and 60 inches (1524 mm) deep maneuvering space...
-
11B-221.2.3.1 Horizontal dispersion
Wheelchair spaces shall be dispersed horizontally....
-
11B-221.2.3.1 Horizontal dispersion
Wheelchair spaces shall be dispersed horizontally....
-
11B-221.2 Wheelchair spaces
Wheelchair spaces complying with Section 11B-221.2 shall be provided in assembly areas with fixed seating. Advisory 11B-221.2 Wheelchair spaces....
-
Horizontal Dispersion: ADA Standard Section 221.2.3.1
Section 221.2.3.1 covers scoping requirements in the current ADA Standards for horizontal Dispersion in assembly areas.
-
11B-703.5.9 Line spacing
Spacing between the baselines of separate lines of characters within a message shall be 135 percent minimum and 170 percent maximum of the character height. [S.H. ...
-
4.10.5 RAISED CHARACTERS ON HOISTWAY ENTRANCES
All elevator hoistway entrances shall have raised floor designations provided on both jambs. The centerline of the characters shall be 60 in (1525 mm) from the floor....
-
11B-405.2 Slope
EXCEPTION: In existing sites, buildings, and facilities, ramps shall be permitted to have running slopes steeper than 1:12 complying with Table 405.2 where such slopes are necessary due to space...
-
11B-405.2 Slope
EXCEPTION: In existing sites, buildings, and facilities, ramps shall be permitted to have running slopes steeper than 1:12 complying with Table 405.2 where such slopes are necessary due to space...
-
503.4 Floor and Ground Surfaces
503.4 Floor and Ground Surfaces. Vehicle pull-up spaces and access aisles serving them shall comply with 302....
-
M303.2 Wheelchair Spaces
Wheelchair spaces complying with M303.2 shall be provided at diagnostic equipment....
-
805.2 Turning Space
Turning space complying with 304 shall be provided within the room....
-
805.2 Turning Space
Turning space complying with 304 shall be provided within the room....
-
Judicial Facilities: ADA Standard Section 231
Section 231 covers scoping requirements in the current ADA Standards for judicial facilities.