Product Features Fabricated of #18 gauge stainless steel with #4 satin finish Frame miters are not ground smooth and polished Multiple reflective surfaces available Unit is equipped...
Search Results "Parking Surface"
-
AJW Architectural Products U716 Series 16"W x 20"H Channel Frame Mirror w/ Mounted Shelf - Plate Glass Surface
-
AJW Architectural Products U705 Series 16"W x 30"H Angle Frame Mirror w/ Mounted Shelf - Plate Glass Surface
Product Features Fabricated of #18 gauge stainless steel with #4 satin finish Mitered corners are ground and polished smooth Multiple reflective surfaces available Unit is equipped...
-
Counter Slope: ADA Standard Section 406.2
Section 406.2 covers the current ADA Standards for counter slope of adjoining gutters and road surfaces immediately adjacent to curb ramps.
-
Executive summary
The second aim was to compare the current guidelines for amusement park rides with the results obtained by evaluating the impact of setup on transfer performance using a custom-built transfer...
-
Parallel Approach: ADA Standard Section 904.4.1
A portion of the counter surface that is 36 inches (915 mm) long minimum and 36 inches (915 mm) high maximum above the finish floor shall be provided....
-
11B-406.5.6 Grade breaks
Grade breaks shall not be permitted on the surface of ramp runs and turning spaces. Surface slopes that meet at grade breaks shall be flush....
-
Story
That portion of a building or facility designed for human occupancy included between the upper surface of a floor and upper surface of the floor or roof next above....
-
11B-406.5.6 Grade breaks
Grade breaks shall not be permitted on the surface of ramp runs and turning spaces. Surface slopes that meet at grade breaks shall be flush....
-
11B-703.4.1 Height above finish floor or ground
Tactile characters on signs shall be located 48 inches (1219 mm) minimum above the finish floor or ground surface, measured from the baseline of the lowest Braille cells and 60 inches (1524...
-
11B-703.4.1 Height above finish floor or ground
Tactile characters on signs shall be located 48 inches (1219 mm) minimum above the finish floor or ground surface, measured from the baseline of the lowest Braille cells and 60 inches (1524...
-
11B-303.5 Warning curbs
Abrupt changes in level exceeding 4 inches (102 mm) in a vertical dimension between walks, sidewalks or other pedestrian ways and adjacent surfaces or features shall be identified by warning...
-
11B-303.5 Warning curbs
Abrupt changes in level exceeding 4 inches (102 mm) in a vertical dimension between walks, sidewalks or other pedestrian ways and adjacent surfaces or features shall be identified by warning...
-
AJW Architectural Products U190 Series Singlefold Towel Dispenser - Surface Mounted
Product Features Holds 400 single fold towels Fabricated of #22 gauge stainless steel with a #4 satin finish Secured with pin tumbler lock, keyed like all AJW...
-
Bobrick ClassicSeries LiquidMate® Surface-Mounted Soap Dispenser B-156
Corrosion-resistant valve dispenses thin, free-flowing commercially marketed all-purpose hand soaps. Translucent polyethylene container provides visible soap level. 24-fl oz (0.7-L)...
-
Bobrick Surface-Mounted Multi-Roll Toilet Tissue Dispenser B-4288
Satin-finish stainless steel unit with stainless steel dispensing mechanism. Flush tumbler lock. Holds two rolls up to 5 1⁄4" (135mm) diameter (1800 sheets). Extra roll automatically...
-
Norton Surface Mounted Series 5600 Hands-Free Door Operation Kits
The NORTON 5600 Series Hands-Free Kits combine a wave-to-open switch with the 5600 power operator to open the door and provide a ‘clean’ exit without touching hardware. However,...
-
Bobrick Surface-Mounted Multi-Roll Toilet Tissue Dispenser B-2888
Satin-finish stainless steel unit with stainless steel dispensing mechanism. Door has flat face with protruding tumbler lock. Holds two rolls up to 5 1⁄4" (135mm) diameter (1800...
-
Bobrick Surface-Mounted Toilet Tissue Dispenser for Two Rolls B-27460
Vandal-resistant unit: heavy-duty cast aluminum, satin finish. Tumbler lock secures spindles in place. High-impact plastic spindles hold rolls up to 6" (150mm) diameter (2000...
-
Bobrick TrimLine Series ADA Surface-Mounted Hand Dryer B-7120.230V
Durable, 22-gauge, zinc-plated steel with white epoxy cover with black plastic trim, automatic sensor, dual air outlets, 208-240V AC, 6.8-7.8 Amp, 1400-1900 Watts, 50/60 Hz, Single...
-
Bobrick TrimLine Series ADA Surface-Mounted Hand Dryer B-7120.115V
Durable, 22-gauge, zinc-plated steel with white epoxy cover with black plastic trim, automatic sensor, dual air outlets, 115V AC, 15 Amp, 1725 Watts, 50/60 Hz, Single Phase, UL...
-
Gamco Surface Mounted Multi-Roll Toilet Tissue Dispenser - TTD-5
Description Satin-finish stainless steel. Door has tumbler lock. Holds two standard core toilet tissue rolls up to 5 1/4" (135mm) diameter. Extra toilet tissue roll automatically...
-
American Specialties Single-Roll Surface Mounted Toilet Paper Holder 7305
Type 304 bright finish stainless steel with chrome-plated roller. Heavy gauge concealed bracket mounts on wall secured with stainless steel set screw. Holds 1800 sheet standard core...
-
BUILDING
Parking lots, play areas, patios, constructed trails, man-made outdoor areas are often not considered to be buildings. Rather, these elements are generally considered to be facilities....
