If the surface of the accessible route, clear floor or ground spaces, and turning spaces that connect play components are submerged, the accessible route does not have to comply with the...
Search Results "Walking Surface"
Filters
Commonly Searched Documents
-
Water Play Components
-
4.34.6.5(1)
(1) The sink and surrounding counter shall be mounted at a maximum height of 34 in (865 mm) above the floor, measured from the floor to the top of the counter surface, or shall be adjustable...
-
11B-705.3 Product Approval
Only approved DSA-AC detectable warning products and directional surfaces shall be installed as provided in the California Code of Regulations (CCR), Title 24, Part 1, Chapter 5, Articles...
-
11B-903.4 Back support
Back support shall be 48 inches (1219 mm) long minimum and shall extend from a point 2 inches (51 mm) maximum above the seat surface to a point 18 inches (457 mm) minimum above the seat...
-
Mockett DH4/DH5 Installation Video
Lightweight, yet sturdy and durable, these subtle complementary pulls will enhance the overall design of any door surface....
-
Variety Freedom Program
wide scope, Freedom grants may cover Manual and powered wheelchairs Adaptive bicycles and trikes Assistance animals Hoists and lifts Modified vehicle access Standing and walking...
-
AJW Architectural Products US712 Series U7128B-1216 12"Wx16"H Security Concealed Mount Mirror, Angle Frame, Stainless Steel Surface
Product Features fabricated of #14 gauge stainless steel with a #4 satin finish Hooks Collapse To Prevent Injury Product Has Security Applications Product Specs Frame:...
-
Tread Width
The visible trail surface measured perpendicular to the direction of travel....
-
Sargent HC 8800 Rim Exit Device
Meets UL panic test requirements without roller strikes which compromise strengh and durability "Anti-walk" latchbolt design eliminiates the need for guarded latchbolt Withstands...
-
Safety
GSA requires users to operate their Segway at a speed no greater than a walking pace of three (3) miles per hour. ...
-
EQUIPMENT
Treadmills, for example, are effective in providing predictable walking and running conditions, which can be necessary and appropriate for some individuals with disabilities (Stanish, 2010...
-
Responsibility for supervision and care of a service animal. (Section-by-Section Analysis)
In such an instance, the individual may not be able to walk or feed the service animal....
-
Typical Issues
The accessible voting area must be on an accessible route and have an accessible entrance and adequate circulation and maneuvering space for voters who use wheelchairs or scooters or who walk...
-
36 Inch Wide Stalls
This stall is specifically designed for people who have difficulty walking or standing from a seated position....
-
4.4.1* GENERAL
projecting from walls (for example, telephones) with their leading edges between 27 in and 80 in (685 mm and 2030 mm) above the finished floor shall protrude no more than 4 in (100 mm) into walks...
-
Facilities Specializing in Services for Persons with Mobility Impairments
assistance of a brace, cane, crutch, prosthetic device, wheelchair, or powered mobility aid * arthritic, neurological, or orthopedic conditions that severely limit one's ability to walk...
-
801.1 Scope
For example, 806 addresses guest rooms in transient lodging facilities while 902 contains the technical specifications for dining surfaces....
-
801.1 Scope
For example, 806 addresses guest rooms in transient lodging facilities while 902 contains the technical specifications for dining surfaces....
-
M301.4.2 Clearance Around Base
The base of the equipment shall provide a clearance 6 inches (150 mm) high minimum measured from the floor and 36 inches (915 mm) deep minimum measured from the edge of the examination surface...
-
903.4 Back Support
Back support shall be 42 inches (1065 mm) long minimum and shall extend from a point 2 inches (51 mm) maximum above the seat surface to a point 18 inches (455 mm) minimum above the seat...
-
M302.4.2 Clearance Around Base
The base of the equipment shall provide a clearance 6 inches (150 mm) high minimum measured from the floor and 36 inches (915 mm) deep minimum measured from the edge of the examination surface...
-
T303.3 Cross Section
Gripping surfaces shall have a cross section complying with T303.3....
-
M302.3 Supports
Transfer supports, armrests, and reclining surfaces shall comply with M302.3....
-
M301.3 Supports
Transfer supports, stirrups, and reclining surfaces shall comply with M301.3....
