In detention and correctional facilities, common use areas that are used only by inmates or detainees and security personnel and that do not serve holding cells or housing cells required...
Search Results "Supplemental Requirement"
-
203.7 Detention and Correctional Facilities
-
203.8 Residential Facilities
In residential facilities, common use areas that do not serve residential dwelling units required to provide mobility features complying with 809.2 through 809.4 shall not be required to...
-
TownSteel ED5500 Grade 1 Panic Rim Device
ED5500/5600 Series Exit Device is designed to meet ANSI/BHMA Grade 1 requirements on a budget....
-
TownSteel CSRC Series, Grade 2, Clutched, Conical Rose Cylindrical Locks
Standard Available lever Sentinel, Gala, Quest Available Finish US26D and US10B stock finish, other finishes upon request Code Compliance: ANSI/BHMA Meets or exceeds all Grade 2 requirements...
-
Safety Step TD Parking Stall Mats
Due to its proprietary peel +n stick technology, the mats take just minutes to install and require no special tools....
-
Bobrick Koala Kare Horizontal, Wall-Mounted Baby Changing Station KB200
Meets ADA requirements when mounted properly. Bed surface exclusively contains Microban® antimicrobial, reducing odor causing bacteria. Liner dispenser features two liner cavities....
-
TownSteel CB Series, Grade 2 Non-Clutched Flat Rose Cylindrical Locks
Available lever Sentinel, Gala, Quest Available Finish US26D and US10B stock finish, other finishes upon request Code Compliance: ANSI/BHMA Meets or exceeds A156.2-2003 Grade 2 requirements...
-
PDQ MR Series Mortise Lock
., Leola, Pennsylvania, Assembled in USA, meeting the requirements of the Buy American Act, with a Lifetime manufacturer's limited warranty....
-
Inpro Corporation ENDURANT® Ceiling Hung Partitions
25" to 37" widths Panels: up to 60" widths and 58" high Pilasters: 83" for partitions 3" - 24" wide and with overhead brace Floor to ceiling anchored, height as required...
-
Inpro Corporation ENDURANT® Floor-Mounted Overhead-Braced Partitions
25" to 37" widths Panels: up to 60" widths and 58" high Pilasters: 83" for partitions 3" - 24" wide and with overhead brace Floor to ceiling anchored, height as required...
-
AquaTrek2 ADA Transfer System
ADA REQUIREMENTS: Transfer Platform at 30”x26” Platform Height at 18” from Deck Transfer Steps Maximum 8” Rise Tread Depth at 15” Non-slip Surface...
-
Norton Surface Mounted Heavy Duty 9500 Series Door Closer
Ideal for high use openings, the Norton 9500 Series Cast Iron door closer offers the durability, flexibility and strength required to meet the needs of your facility....
-
Continuity: ADA Standard Section 505.3
Section 505.3 covers the current ADA Standards for the continuity of handrails.
-
11B-404.2.4.4 Floor or ground surface
Floor or ground surface within required maneuvering clearances shall comply with Section 11B-302....
-
11B-404.2.4.4 Floor or ground surface
Floor or ground surface within required maneuvering clearances shall comply with Section 11B-302....
-
11B-302.2 Carpet
built-in as part of new construction or alterations, and are part of an accessible route, they must comply with the accessibility provisions of this section and Section 11B-302.1 which requires...
-
11B-302.2 Carpet
built-in as part of new construction or alterations, and are part of an accessible route, they must comply with the accessibility provisions of this section and Section 11B-302.1 which requires...
-
11B-810.5.3 Platform and vehicle floor coordination
Station platforms shall be positioned to coordinate with vehicles in accordance with the applicable requirements of 36 CFR Part 1192....
-
Site Arrival Points: ADA Standard Section 206.2.1
Section 206.2.1 covers the scoping requirements for site arrival points of accessible routes in the most current ADA Standards.
-
11B-810.5.3 Platform and vehicle floor coordination
Station platforms shall be positioned to coordinate with vehicles in accordance with the applicable requirements of 36 CFR Part 1192....
-
1003.2.1 Boat Slips
Where an existing gangway or series of gangways is replaced or altered, an increase in the length of the gangway shall not be required to comply with 1003.2 unless required by 202.4....
-
III-4.4400 Continuing obligation
A hotel that is being altered is required to provide a number of accessible rooms in the area being altered that is proportionate to the number it would be required to provide in new construction...
-
11B-1003.2.1 Boat slips
unless required by Section 11B-202.4....
-
1003.2.1 Boat Slips
Where an existing gangway or series of gangways is replaced or altered, an increase in the length of the gangway shall not be required to comply with 1003.2 unless required by 202.4....
