stainless steel with a #4 satin finish Holds two standard toilet tissue rolls Product Specs Hood: Fabricated of #18 gauge stainless steel with a #4 satin finish on all exposed surfaces...
Search Results "Ground Surface"
-
AJW Architectural Products U804 Dual Hooded Toilet Tissue Dispenser - Surface Mounted - Non-Controlled
-
AJW Architectural Products U803 Single Hooded Toilet Tissue Dispenser - Surface Mounted - Non-Controlled
stainless steel with a #4 satin finish Holds one standard toilet tissue roll Product Specs Hood: Fabricated of #18 gauge stainless steel with a #4 satin finish on all exposed surfaces...
-
Pilot Rock FS-30 Campfire Ring
This taller fire ring, available in 18" or 24" tall designs, brings the cooking surface to a convenient height for use from a wheelchair....
-
11B-606.3 Height
Lavatories and sinks shall be installed with the front of the higher of the rim or counter surface 34 inches (864 mm) maximum above the finish floor or ground....
-
11B-606.3 Height
Lavatories and sinks shall be installed with the front of the higher of the rim or counter surface 34 inches (864 mm) maximum above the finish floor or ground....
-
11B-606.3 Height
Lavatories and sinks shall be installed with the front of the higher of the rim or counter surface 34 inches (864 mm) maximum above the finish floor or ground....
-
Gamco Surface-Mounted Hand Dryer - DR-510
Description: This small, low profile, ADA compliant hand dryer is multi-voltage running on 110 up to 240 Volt AC electrical supply. Operation is automatically controlled on/off,...
-
Bobrick Surface-Mounted Medicine Cabinet B-297
All-steel cabinet and two fixed shelves with baked white enamel finish. Mirror: No. 1 quality, 1⁄8" (3mm) glass electrolytically copper-plated. Door has enameled steel piano-hinge...
-
Gamco Surface-Mounted Towel Pin Satin - 76777
Description (Formerly model B-5167) Satin-finish. All components welded construction with concealed screw attached on 20-gauge (0.9mm) stainless steel wall plate.
-
Bobrick Surface-Mounted Towel Pin B-677
Bright-polished stainless steel. Flange is 2" x 2" (50 x 50mm). Projects 3 3⁄8" (85mm) from wall.
-
Norton Surface Mounted 2800ST Cam Action Closer
The cam action design is ideal as it provides greater efficiency than a rack and pinion door closer for slide track applications. Cam action closers provide a lower opening...
-
Allegion LCN 1000 Surface Mounted Door Control
Applications For aluminum, hollow metal, or wood swinging doors and frames Can be used with hinge or pivot mounted door Mounts on a 1 3/4' transom without...
-
AJW Architectural Products US54 Collapsable Security Hook Strip & Shelf 18"L, 4 Hooks, Exposed Mounting - Surface Mounted
Six (6) exposed mounting points secure unit to wall surface....
-
11B-404.2.9 Door and gate opening force
surface and the centerline of the second push plate shall be 30 inches (762 mm) minimum and 44 inches (1118 mm) maximum above the floor or ground surface....
-
11B-404.2.9 Door and gate opening force
surface and the centerline of the second push plate shall be 30 inches (762 mm) minimum and 44 inches (1118 mm) maximum above the floor or ground surface....
-
Elevated Play Components: ADA Standard Section 240.2.2
Section 240.2.2 covers scoping requirements in the current ADA Standards for elevated play components.
-
11B-1005.2.1 Height
At least 25 percent of the railings, guards, or handrails shall be 34 inches (864 mm) maximum above the ground or deck surface....
-
Will CALGreen be amended to require that some parking spaces are designed so that they can comply with Chapter 11B requirements when converted to EV charging spaces (i.e. slope, vertical clearance, path of travel)?
space, provide an electrical raceway to the service panel, and provide adequate capacity at the service panel for future EVCS; good design practice would be to incorporate appropriate ground...
-
11B-602.9 Pedestrian protection
When used, wing walls or barriers shall project horizontally at least as far as the drinking fountain and to within 6 inches (152 mm) vertically from the floor or ground surface....
-
11B-1005.2.1 Height
At least 25 percent of the railings, guards, or handrails shall be 34 inches (864 mm) maximum above the ground or deck surface....
-
11B-1005.2.1 Height
At least 25 percent of the railings, guards, or handrails shall be 34 inches (864 mm) maximum above the ground or deck surface....
-
Gamco Fixed Position Tilt Mirror - FT-Series
Description Frame - fabricated of 18-8 type 304 stainless steel with exposed surfaces having a #4 satin-finish....
-
11B-705.1.1.3.2
Detectable warning surfaces shall provide a 70 percent minimum visual contrast with adjacent walking surfaces....
-
11B-705.1.1.3.2
Detectable warning surfaces shall provide a 70 percent minimum visual contrast with adjacent walking surfaces....
