Where possible, the height of the transfer step should be minimized to decrease the distance an individual is required to lift up or move down to reach the next step to gain access....
Search Results "Ceiling Mounted Patient Lift"
-
1009.5.4 Transfer Steps
-
§ 38.95(a)(1) General
., lift, ramp or bridge plate) complying with either paragraph (b) or (c) of this section; sufficient clearances to permit a wheelchair or mobility aid user to reach a seating location;...
-
11B-808.3 Clear floor space
wheelchair spaces are not required to be located within the defined area of raised jury boxes or witness stands and shall be permitted to be located outside these spaces where ramp or platform lift...
-
11B-808.3 Clear floor space
wheelchair spaces are not required to be located within the defined area of raised jury boxes or witness stands and shall be permitted to be located outside these spaces where ramp or platform lift...
-
1. Transfer Supports
The requirements were the same for transfer surfaces on diagnostic equipment used by patients in the supine, prone, or side-lying position, as well as diagnostic equipment used by patients...
-
Re: Section 307 Protruding Objects
Yes, it is a protruding object hazard based solely on section 307, but so is the (code compliant) lavatory with its (required) 29" high front edge, and the 8" deep (code compliant) shelf mounted...
-
Rockwood Manufacturing Company 107 x 73B/73BL Concealed Mount Pull Plate 8" CTC Pull 3-1/2" x 15" Plate
• Concealed mounting system. Any of the rod type door pulls from No. 105 to No. 118 are appropriate for this application. Options: • Engraving on plates 4" wide or wider....
-
(2) Adjustability: Minimum Low Transfer Height
injury to medical staff and caregivers by lessening the likelihood of back and other lifting injuries....
-
Element-by-Element Safe Harbor
The following examples illustrate how the safe harbor applies: The 2010 Standards lower the mounting height for light switches and thermostats from 54 inches to 48 inches....
-
Stryker Stair-PRO Model 6252
Requires the Registered User plan or above. Login! -
H29
If a coat hook is provided is it mounted no higher than 54 inches above the floor for a side approach or 48 inches above the floor for a front approach?...
-
Grab Bars [4.16.4]
Side grab bars, including those that are continuous, must be mounted to extend at least 54 inches from the back wall....
-
Mirrors [4.19.6]
The mounting height of the bottom of mirrors at accessible lavatories (40 inches maximum above the floor) is based on the standard eye level range of adults seated in wheelchairs (43 to...
-
4.10.4 HALL LANTERNS
Visible signals shall have the following features: (1) Hall lantern fixtures shall be mounted so that their centerline is at least 72 in (1830 mm) above the lobby floor....
-
4.34.6.7* OVENS
Countertop or wall-mounted oven 2. Pull-out board preferred with side-opening door. 3. Clear open space. 4. Bottom-hinged door...
-
11B-604.8.1.5 Grab bars
Where separate grab bars are required on adjacent walls at a common mounting height, an L-shaped grab bar meeting the dimensional requirements of Sections 11B-604.5.1 and 11B-604.5.2 shall...
-
Issue 2: Location relative to the crosswalk
Issue 2: Location relative to the crosswalk An APS that is mounted outside the crosswalk area may provide misleading information about the crossing location....
-
Outdoor Rinsing Showers
For a low outdoor rinsing shower, mount a fixed showerhead 48 inches (1,220 millimeters) above the ground or floor....
-
3. Q: I know I can't give a job applicant a medical exam before a conditional job offer is made. But what about physical agility and physical fitness tests?
A: You can give job applicants tests measuring an applicant's ability to perform job-related tasks or physical fitness tests (tests measuring performance of running, lifting, etc.) before...
