Clearance between handrail gripping surfaces and adjacent surfaces shall be 1½ inches (38 mm) minimum....
Search Results "End Transfer Surface"
Filters
Commonly Searched Documents
-
11B-505.5 Clearance
-
Ground Level Play Components: ADA Standard Section 240.2.1
Section 240.2.1 covers scoping requirements in the current ADA Standards for ground level play components.
-
11B-240.2.1 Ground level play components
A ramp or transfer system to the top of the slide is not required. Where a sand box is provided, an accessible route must connect to the border of the sand box....
-
11B-705.1.1.4 Resiliency
Detectable warning surfaces shall differ from adjoining surfaces in resiliency or sound-on-cane contact....
-
11B-607.4.1.1 Back wall
Each grab bar shall be installed 15 inches (381 mm) maximum from the head end wall and 12 inches (305 mm) maximum from the control end wall....
-
Shower Threshold
This provision applied to roll-in showers and to transfer showers....
-
L-Shaped Seats: ADA Standard Section 610.3.2
Section 610.3.2 covers the current ADA Standards for L-shaped shower compartment seats.
-
11B-610.3.2 L-shaped seats
The end of the “L” shall be 22 inches (559 mm) minimum and 23 inches (584 mm) maximum from the main seat wall....
-
Pressalit Care PLUS Support Arm Fixed Height Swing Grab Bar
Support arm, 852 mm, ergonomically shaped to provide a clear sense of where the support arm ends. For fixed mounting. Foldable....
-
AJW Architectural Products U704 Series 16"W x 30"H Fixed Tilt Angle Frame Mirror - Plate Glass Surface
Product Features Fabricated of #18 gauge stainless steel with #4 satin finish Frame extends 4" at the top and tapers to 1" at bottom Multiple reflective surfaces available Mirror...
-
Passing Spaces on Trails
Where the clear tread width of a trail is less than 60 inches (1,525 millimeters), provide passing spaces at least every 1,000 feet (300 meters) and at the end of any segment of trail that...
-
607.4.2.1 Back Wall
Each grab bar shall be 24 inches (610 mm) long minimum and shall be installed 24 inches (610 mm) maximum from the head end wall and 12 inches (305 mm) maximum from the control end wall....
-
607.4.1.1 Back Wall
Each grab bar shall be installed 15 inches (380 mm) maximum from the head end wall and 12 inches (305 mm) maximum from the control end wall. [ECTCR UFAS 4.34.5.4(3), Fig. 48(b)]...
-
11B-607.4.2.1 Back wall
Each grab bar shall be 24 inches (610 mm) long minimum and shall be installed 24 inches (610 mm) maximum from the head end wall and 12 inches (305 mm) maximum from the control end wall....
-
607.4.2.1 Back Wall
Each grab bar shall be 24 inches (610 mm) long minimum and shall be installed 24 inches (610 mm) maximum from the head end wall and 12 inches (305 mm) maximum from the control end wall....
-
11B-607.4.2.1 Back wall
Each grab bar shall be 24 inches (610 mm) long minimum and shall be installed 24 inches (610 mm) maximum from the head end wall and 12 inches (305 mm) maximum from the control end wall....
-
AJW Architectural Products US39 Collapsable Security Hook Strip 18"L, 4 Hooks, Exposed Mounting - Surface Mounted
Six (6) exposed mounting points secure unit to wall surface....
-
Excel Dryer, Inc. ThinAir®Hand ADA Surface Mounted Hand Dryer TA-ABS
The ThinAir® Hand Dryer is a high-efficiency model that is surface-mounted and ADA compliant....
-
§ 37.165(e)
(e) The entity may recommend to a user of a wheelchair that the individual transfer to a vehicle seat. The entity may not require the individual to transfer....
-
Grab Bars
Grab bars and any wall or other surfaces adjacent to grab bars must have rounded edges and are not allowed to have sharp or abrasive surfaces....
-
Modifications to the Longitudinal Study
By the end of 2006, NCA had initial commitments from a number of state or federal outdoor recreation entities to provide test sites for the trail surface study, however, the down turn in...
-
Landscape Forms Inc. Austin Bench Collection
This is a natural process that will not affect the structural integrity of the product Optional cast aluminum arms available for backed or backless benches: End arms only or end arms with...
-
ADDENDUM TO PHASE I FINAL REPORT: Points of Clarification
the floor that they needed to transfer over). ...
