[ADA Standards § 4.15.4] Yes No...
Search Results "Industry Standard"
-
J5
-
B6
[ADA Standards § 4.6.4] Yes No...
-
§ 36.406(c)(3) Facilities with residential units and transient lodging units
Residential dwelling units that are designed and constructed for residential use exclusively are not subject to the transient lodging standards....
-
NOTE
NOTE: Sections 4.1.1 through 4.1.7 are different from ANSI A117.1 in their entirety and are printed in standard type (ANSI A117.1 does not include scoping provisions)....
-
§40.1 Purpose.
This part prescribes standards for the design, construction, and alteration of publicly owned residential structures to insure that physically handicapped persons will have ready access...
-
Must accessible routes or crossings be marked?
The ADA Standards require accessible parking spaces and access aisles to be marked, but they do not require accessible routes, including portions crossing vehicular ways, to be marked....
-
1.1.7.3 Conflicts
When the requirements of this code conflict with the requirements of any other part of the California Building Standards Code, Title 24, the most restrictive requirements shall prevail....
-
§ 37.7(a)
(a) For purposes of this part, a vehicle shall be considered to be readily accessible to and usable by individuals with disabilities if it meets the requirements of this part and the standards...
-
1.1.7.3 Conflicts
When the requirements of this code conflict with the requirements of any other part of the California Building Standards Code, Title 24, the most restrictive requirements shall prevail....
-
224.6.2 Facilities with Residential Units and Transient Lodging Units
Residential dwelling units that are designed and constructed for residential use exclusively are not subject to the transient lodging standards....
-
Re: Service Counters
For code compliance, one must create a reasonable standard for sufficient depth for accessible use. Reasonable persons will disagree on that number. Why bother? ...
-
11B-406.5.3 Landings
[2010 ADA Standards] 406.4 Landings. Landings shall be provided at the tops of curb ramps. The landing clear length shall be 36 inches (915 mm) minimum....
-
11B-206.2.5 Restaurants, cafeterias, banquet facilities and bars
[2010 ADA Standards] 2....
-
11B-207.1 General
[2010 ADA Standards] 207.1 General....
-
11B-608.6 Shower spray unit and water
[2010 ADA Standards] EXCEPTION: A fixed shower head located at 48 inches (1220 mm) maximum above the shower finish floor shall be permitted instead of a hand-held spray unit in facilities...
-
11B-608.6 Shower spray unit and water
[2010 ADA Standards] EXCEPTION: A fixed shower head located at 48 inches (1220 mm) maximum above the shower finish floor shall be permitted instead of a hand-held spray unit in facilities...
-
11B-406.5.3 Landings
[2010 ADA Standards] 406.4 Landings. Landings shall be provided at the tops of curb ramps. The landing clear length shall be 36 inches (915 mm) minimum....
-
11B-206.2.5 Restaurants, cafeterias, banquet facilities and bars
[2010 ADA Standards] 2....
-
1.1.2 Purpose
buildings and facilities constructed in this state by the use of state, county, or municipal funds, or the funds of any political subdivision of the state shall conform to the building standards...
-
III. Summary of Comments
Additionally, the commenters noted that the proposed standards focused mostly on individuals with mobility disabilities and recommended providing standards to encompass individuals with...
-
Controls for Ranges and Cooktops
A few commenters stated that the Department lacks authority under the Fair Housing Act to impose design standards on appliances....
-
T503 Passenger Access Routes
In the 2010 NPRM, the Access Board proposed prescribing a specific dimensional standard (34 inches) for the clear width of passenger access routes. See 2010 NPRM, Section T502.2....
-
9. Broadening of Documentation Requirement for Undue Burden Exception
Section 1194.2 (a)(2) of the existing 508 Standards requires agencies to provide supporting documentation when determining that procurement of a compliant product would impose an undue burden...
-
3.3.7 Toe Clearance Height, minimum
3.3.7 Toe Clearance Height, minimum There is relatively large disparity between the standards for toe clearance height, with the U.S. having the lowest (230 mm or 9 in.), followed by...