505.7 Cross Section. Handrail gripping surfaces shall have a cross section complying with 505.7.1 or 505.7.2....
Search Results "Rail Crossing"
-
505.7 Cross Section
-
Platform and Vehicle Floor Coordination: ADA Standard Section 810.5.3
, commuter rail, or intercity rail systems: 810.5.3 Platform and Vehicle Floor Coordination....
-
Cross Slope and Surfaces [4.8.6]
The cross slope (2% maximum) must be minimized because it makes wheelchair travel difficult by distributing more weight and required force to one side and causing front casters to veer....
-
406.7 Islands
Raised islands in crossings shall be cut through level with the street or have curb ramps at both sides....
-
406.7 Islands
Raised islands in crossings shall be cut through level with the street or have curb ramps at both sides....
-
Section 4.26.2
Section 505.7 of the 2010 Standards requires handrail gripping surfaces with a circular cross section to have an outside diameter of 1 ¼ inches to 2 inches....
-
11B-218.3 Key stations and existing intercity rail stations
Key stations and existing intercity rail stations shall comply with Sections 11B-810.5 through 11B-810.10. ...
-
11B-218.3 Key stations and existing intercity rail stations
Key stations and existing intercity rail stations shall comply with Sections 11B-810.5 through 11B-810.10. ...
-
11B-218.3 Key stations and existing intercity rail stations
Key stations and existing intercity rail stations shall comply with Sections 11B-810.5 through 11B-810.10....
-
206.4.4.3 Key Stations and Intercity Rail Stations
206.4.4.3 Key Stations and Intercity Rail Stations....
-
§ 38.71(a)
(a) New, used and remanufactured light rail vehicles, to be considered accessible by regulations in part 37 of this title shall comply with this subpart....
-
12184(c)(1) Exception
Exception To the extent that compliance with subsection (a)(2)(C) or (a)(7) of this section would significantly alter the historic or antiquated character of a historical or antiquated rail...
-
§ 37.49 Designation of responsible person(s) for intercity and commuter rail stations
[See subsections ...]
-
11B-206.2.19 Pedestrian street crossings
The curb ramp (excluding any flared sides) or blended transition shall be contained wholly within the width of the pedestrian street crossing served....
-
810.6 Rail Station Signs
810.6 Rail Station Signs. Rail station signs shall comply with 810.6....
-
406.7 Islands
Raised islands in crossings shall be cut through level with the street or have curb ramps at both sides....
-
505.7 Cross Section
Handrail gripping surfaces shall have a cross section complying with 505.7.1 or 505.7.2....
-
505.7 Cross Section
Handrail gripping surfaces shall have a cross section complying with 505.7.1 or 505.7.2....
-
505.7 Cross Section
Handrail gripping surfaces shall have a cross section complying with 505.7.1 or 505.7.2....
-
Cross Slope
Cross Slope The cross slopes of gangways, transition plates and floating piers that are part of an accessible route must be designed and constructed to not exceed a maximum of 2 percent...
-
10.3.1(13)
(13) Where it is necessary to cross tracks to reach boarding platforms, the route surface shall be level and flush with the rail top at the outer edge and between rails, except for a maximum...
-
§ 37.59 Differences in accessibility completion dates
., extensions of different periods of time for a station which serves both rapid and commuter rail systems), accessibility to the following elements of the station shall be achieved by the...
-
1.1.12 Ramp cross slope
1.1.12 Ramp cross slope....
-
11B-206.4.4.3 Key stations and intercity rail stations
Key stations and existing intercity rail stations required by Subpart C of 49 CFR part 37 to be altered, shall have entrances complying with Section 11B-404....