Many forest roads are closed to motor vehicle traffic by gates or other types of barriers. Often, foot travel is allowed beyond the restriction device. When foot travel is encouraged...
Search Results "Clear Width"
Filters
Commonly Searched Documents
-
Road Closure Drawings
-
8.5 Stacks
Minimum clear aisle width between stacks shall comply with 4.3, with a minimum clear aisle width of 42 in (1065 mm) preferred where possible....
-
8.5 STACKS
Minimum clear aisle width between stacks shall comply with 4.3, with a minimum clear aisle width of 42 in (1065 mm) preferred where possible....
-
11B-1009.2.5 Seat width
The seat shall be 16 inches (406 mm) wide minimum.
-
§ 38.93(a)(1)
each side of the car from which passengers board opening onto station platforms and at least one adjacent doorway into the passenger coach compartment, if provided, shall have a minimum clear...
-
904.3.1 Aisle
Aisles shall comply with 403.
-
SECTION 1017 AISLES
SECTION 1017 AISLES [DSA-AC] In addition to the requirements of this section, means of egress, which provide access to, or egress from, buildings or facilities where...
-
11B-904.3.1 Aisle
Aisles shall comply with Section 11B-403.
-
904.3.1 Aisle
Aisles shall comply with 403.
-
E1-a
E1-a. Is there an accessible route, at least 36 inches wide, that connects the accessible entrance to all shelter areas (it may narrow to 32 inches wide for up to 2 feet in length)?...
-
904.3.1 Aisle
904.3.1 Aisle. Aisles shall comply with 403.
-
E1-1. Accessible Route
E1-1. Is there an accessible route, at least 36 inches wide that connects the accessible entrance to the voting area (the accessible route may narrow to 32 inches wide for up to 2...
-
SECTION 1018 AISLES
[See subsections ...]
-
11B-904.3.1 Aisle
Aisles shall comply with Section 11B-403.
-
1018.2 Aisles in assembly spaces
Aisles and aisle accessways serving a room or space used for assembly purposes shall comply with Section 1029. [DSA-AC] In addition to the requirements of this section, means of...
-
SECTION 1018 AISLES
[See subsections ...]
-
11B-904.3.1 Aisle
Aisles shall comply with Section 11B-403.
-
1018.2 Aisles in assembly spaces
[DSA-AC] In addition to the requirements of this section, means of egress, which provide access to, or egress from, buildings or facilities where accessibility is required for...
-
Clear Width [§405.5]
Clear Width [§405.5] Ramp runs must have a clear width of 36” minimum (measured between handrails where provided)....
-
Clear Floor Space: ADA Standard Section 1004.1
Clear floor or ground spaces required at exercise machines and equipment shall be permitted to overlap. Advisory 1004.1 Clear Floor Space....
-
B) Accessible Route
The width of an accessible route can be as narrow as 32 inches wide, such as at a doorway or a narrow section of hallway, but only for a distance up to 24 inches long....
-
4.3.5 Turning clearance
T shaped space is not included here because it can be derived from the 90-degree turn to establish the width of the arms of the T and the clear floor space to determine the length of each...
-
410.6 Doors and Gates
End doors and gates shall provide a clear width 32 inches (815 mm) minimum. Side doors and gates shall provide a clear width 42 inches (1065 mm) minimum....
-
11B-703.8.5 Character width
The uppercase letter “O” shall be used to determine the allowable width of all low resolution VMS characters of a font....