[See subsections ...]
Search Results "Built-In Element"
Filters
Commonly Searched Documents
-
11B-226 Dining surfaces and work surfaces
-
11B-902 Dining surfaces and work surfaces
[See subsections ...]
-
Accessible Lavatory
clarifying the prohibition on accessible lavatories being placed in toilet compartments (213.3.4) removing references to operable parts dispensers, and receptacles, as such elements...
-
68.102(b) Estimated cost of construction
(b) For purposes of registration, the estimated cost of construction for the project shall be based on the pedestrian elements only....
-
11B-606.7 Sink depth
Where a forward approach is required at a sink, knee and toe clearance shall be provided in compliance with Section 11B-306.
-
11B-608.3.2 Standard roll-in type shower compartments
Grab bars shall be provided on the back wall and the side wall opposite the seat. Grab bars shall not be provided above the seat. Grab bars shall be installed 6 inches (152 mm)...
-
11B-606.1 General
Lavatories and sinks shall comply with Section 11B-606. Advisory 11B-606.1 General. If soap and towel dispensers are provided, they must be located within the reach ranges...
-
11B-809.4.1 Subsequent bathrooms
In residential dwelling units with more than one bathroom, when a bathtub is installed in the first bathroom in compliance with Section 11B-809.4 and a shower compartment is provided...
-
4.1.3(18)
(18) If fixed or built-in seating or tables (including, but not limited to, study carrels and student laboratory stations), are provided in accessible public or common use areas, at least...
-
A. Question 1: Applicability of Section 904.4.1’s Exception
If, however, Defendants’ transaction counter is equal to or longer than 36 inches as built, Defendants still have complied with 904.4.1 for the reasons explained below.2 2 The submissions...
-
4.3.2 Seat Height
4.3.2 Seat Height Seat height is an important dimension for establishing the height of built-in seating, toilet heights, tub heights, shower seat heights and other transfer related surfaces...
-
606 Lavatories and Sinks
[See subsections ...]
-
11B-211 DRINKING FOUNTAINS
[See subsections ...]
-
11B-608.2.2 Standard roll-in type shower compartments
Standard roll-in type shower compartments shall be 30 inches (762 mm) wide minimum by 60 inches (1524 mm) deep minimum clear inside dimensions measured at center points of opposing...
-
608.2.2 Standard Roll-In Type Shower Compartments
Standard roll-in type shower compartments shall be 30 inches (760 mm) wide minimum by 60 inches (1525 mm) deep minimum clear inside dimensions measured at center points of opposing...
-
F213.3.2 Water Closets
Where water closets are provided, at least one shall comply with 604.
-
F211 Drinking Fountains
[See subsections ...]
-
608.1 General
Shower compartments shall comply with 608. Advisory 608.1 General. Shower stalls that are 60 inches (1525 mm) wide and have no curb may increase the usability of a bathroom...
-
602 Drinking Fountains
[See subsections ...]
-
608.2.1 Transfer Type Shower Compartments
Transfer type shower compartments shall be 36 inches (915 mm) by 36 inches (915 mm) clear inside dimensions measured at the center points of opposing sides and shall have a 36 inch...
-
608.2 Size and Clearances for Shower Compartments
Shower compartments shall have sizes and clearances complying with 608.2.
-
608 Shower Compartments
[See subsections ...]
-
608.2.1 Transfer Type Shower Compartments
608.2.1 Transfer Type Shower Compartments. Transfer type shower compartments shall be 36 inches (915 mm) by 36 inches (915 mm) clear inside dimensions measured at the center points...
-
11B-608 SHOWER COMPARTMENTS
[See subsections ...]