Glazing: Clear Low-E tempered 1 3/8″ insulated is the standard. A minimum of 1/4″ single pane glass to a maximum 1 1/2″ hurricane rated insulated glass may be used....
Search Results "Grade 1 Braille"
Filters
Commonly Searched Documents
-
Panda TS.87 Thermally Broken Slim Profile Lift & Slide System
-
Floor and Ground Surfaces: ADA Standard Section 503.4
Section 503.4 covers the current ADA Standards for the floor and ground surfaces at passenger loading zones.
-
217.2 Wheelchair Accessible Telephones
Number of Telephones Provided on a Floor, Level, or Exterior Site Minimum Number of Required Wheelchair Accessible Telephones 1...
-
9. Amend § 36.308 as follows:
Revise paragraphs (a)(1)(i), (a)(1)(ii), introductory text, (A), and (B), and (b); b. Add paragraphs (a)(1)(iii) and (c) to read as follows:...
-
Mary Ann Hay, IALD, LEED™ AP. Artificial Lighting
This is a completely below-grade executive conference center....
-
11B-405.2 Slope
Ramp runs shall have a running slope not steeper than 1:12. Exception: Reserved....
-
F224.2 Guest Rooms with Mobility Features
Guest Rooms Provided Minimum Number of Required Rooms Without Roll-in Showers Minimum Number of Required Rooms With Roll-in Showers Total Number of Required Rooms 1...
-
11B-405.2 Slope
Ramp runs shall have a running slope not steeper than 1:12. Exception: Reserved....
-
11B-405.2 Slope
Ramp runs shall have a running slope not steeper than 1:12. Exception: Reserved....
-
11B-101.2 Reserved.
technical and scoping specifications for those elements in either the 1991 Standards or in the Uniform Federal Accessibility Standards (UFAS), Appendix A to 41 CFR part 101–19.6 (July 1,...
-
Talking Three-Dimensional Models for Way-finding
There are some Braille labels on the buildings and a clear You Are Here marker....
-
R208 Detectable Warning Surfaces (Section-by-Section Analysis)
locations on pedestrian access routes and at transit stops: Curb ramps and blended transitions at pedestrian street crossings; Pedestrian refuge islands; Pedestrian at-grade...
-
R204 Pedestrian Access Routes (Section-by-Section Analysis)
Pedestrian access routes must be provided within: Sidewalks and other pedestrian circulation paths located in the public right-of-way; Pedestrian street crossings and at-grade...
-
Mobility Use Demographics
1.5%) 1 (1.5%) CP 0 (0%) 0 (0%) 1 (1.5%) 0 (0%) MS 2 (3%)...
-
Seton Directional Entrance Sign - Left Arrow
Use Accessible Entrance Signs to direct users to the nearest accessible entrance Engineer Grade reflective .063" aluminum material is equally visible day or night Extend the life...
-
11B-206.2.3.1 Stairs and escalators in existing buildings
modifications are necessary for the installation, an accessible route shall be provided between the levels served by the escalator or stair unless exempted by Section 11B-206.2.3 Exceptions 1...
-
11B-404.2.4.4 Floor or ground surface
Changes in level, slopes exceeding 1:48, and detectable warnings shall not be permitted. Exceptions: Reserved....
-
F217.2 Wheelchair Accessible Telephones
Wheelchair Accessible Telephones Number of Telephones Provided on a Floor, Level, or Exterior Site Minimum Number of Required Wheelchair Accessible Telephones 1...
-
217.2 Wheelchair Accessible Telephones
Number of Telephones Provided on a Floor, Level, or Exterior Site Minimum Number of Required Wheelchair Accessible Telephones 1...
-
[2010 ADAS] 105.2.3 ASTM
per foot value for straight propulsion and for turning less than the average work per foot values for straight propulsion and for turning, respectively, on a hard, smooth surface with a grade...
-
ETA Public Telephone Summary Chart and Survey Instructions
per floor. [4.1.3(17)(a)] b. 1 per floor, when 1 bank is provided on this floor [4.1.3(17)(a)] c. 1 per bank, when 2 or more banks are provided on this floor....
-
F.1. - Under what circumstances may an agency conclude that no EIT is available that meets the Access Board’s technical provisions?
An agency may conclude that EIT meeting the applicable technical provisions of the Access Board’s standards is not available (and purchase EIT that does not meet those provisions)...
-
Thresholds [§404.2.5]
Thresholds [§404.2.5] The height of thresholds is limited to 1/2” in new construction. The edge must be beveled 1:2 maximum above a height of 1/4”....
-
11B-809.10.6.5 Thresholds
Where provided thresholds shall be 2 inches (51 mm) maximum in height and have a beveled or sloped angle not exceeding 1 unit vertical in 2 units horizontal (26.6 degrees from the horizontal...
