This section requires at least 20 percent, but not less than one, of each type of outdoor constructed feature provided at each location on trails, other than within facilities provided on...
Search Results "Grab Bar Location"
Filters
Commonly Searched Documents
-
F247.5 Outdoor Constructed Features
-
4.34.5.5(4) Controls
Faucets and other controls shall be located as shown in Fig. 37 and shall comply with 4.27.4....
-
F247.5 Outdoor Constructed Features
constructed features are provided on trails, other than within facilities specified in F247.4, at least 20 percent, but not less than one, of each type of outdoor constructed feature at each location...
-
Are redundant controls for an element required to comply?
If a redundant control is located in a different space, however, it must comply. All light switches are required to comply....
-
§ 37.135(b) Initial submission
provided in §37.141 of this part, each entity shall submit its initial plan for compliance with the complementary paratransit service provision by January 26, 1992, to the appropriate location...
-
Protrusion Limits: ADA Standard Section 307.2
Section 307.2 covers the current ADA Standards for protrusion limits.
-
General: ADA Standard Section 308.1
Section 308.1: of the ADA Standards covers information in the current ADA Standards for reach ranges.
-
Designated Aisle Seats: ADA Standard Section 221.4
Section 221.4 covers scoping requirements in the current ADA Standards for designated aisle seats in assembly areas.
-
Amusement Ride Seats Designed for Transfer: ADA Standard Section 1002.5
Where possible, designers are encouraged to locate the ride seat no higher than 17 to 19 inches (430 to 485 mm) above the load and unload surface....
-
11B-209.4 Valet parking
In addition, when valet parking is provided, a passenger drop-off and loading zone complying with Section 11B-503 shall be located on an accessible route of travel to the entrance of the...
-
11B-307.2 Protrusion limits
Elements located on circulation paths, including operable elements, must comply with requirements for protruding objects....
-
11B-216.7 Elevators
Existing buildings that have been remodeled to provide specific elevators for public use that comply with these building standards shall have the location of and the directions to these...
-
11B-308.1 General
Accessible elements and operable parts designed for adult use or children over age 12 can be located outside these ranges but must be within the adult reach ranges required by Section 11B...
-
11B-1002.5 Amusement ride seats designed for transfer
Where possible, designers are encouraged to locate the ride seat no higher than 17 to 19 inches (430 to 485 mm) above the load and unload surface....
-
SECTION 3101B SCOPE
Public pools include those located in or designated as the following: commercial building, hotel, motel, resort, recreational vehicle or mobile home park, campground, apartment house, condominium...
-
Audible WALK indications
When the pedestrian pushbutton is properly located close to the departure curb, a low-volume WALK signal will be adequate for usability....
-
Inclusive Safety Briefing
The exits located in the back two corners of this room, where you entered are accessible and have no steps....
-
ADOPTION AND IMPLEMENTATION OF EFFECTIVE COMMUNICATION POLICY
THE CREDIT UNION shall post and maintain a copy of the Effective Communication Policy in all THE CREDIT UNION locations in a conspicuous location where employees and the public can readily...
-
Accessible Fishing Piers and Platforms
percent (25%) of railings, guards, or handrails (if provided) to be at a 34-inch maximum height (so that a person seated in a wheelchair can cast a fishing line over the railing) and to be located...
-
Access Aisle
Section 502.3 of the 2010 Standards provides the flexibility necessary to permit designers and others to determine the most appropriate location of the accessible route to the accessible...
-
1136A.2 Switch and control heights
or switches intended to be used by the occupant of the room or area to control lighting and receptacle outlets, appliances, alarms or cooling, heating and ventilating equipment shall be located...
-
11B-221.2.3.2 Vertical dispersion
In addition, wheelchair spaces shall be located in each balcony or mezzanine that is located on an accessible route. Exceptions: 1. ...
-
206.2.8 Employee Work Areas
Common use circulation paths located within employee work areas that are less than 1000 square feet (93 m²) and defined by permanently installed partitions, counters, casework, or furnishings...
-
Prevention of Fraud in Purchase of Tickets for Accessible Seating
stating that, if the user of the ticket does not need the specific features of the accessible seat, the venue may require the ticket holder to move to a different, non-accessible seating location...