Swing-away grab bars were typically located on both sides of the toilet rather than fixed grab bars on the side and rear walls as indicated in ADAAG....
Search Results "Fixed Assembly Seating"
-
Types of Alternative Designs
-
704.10 Vertical exposure
not less than 1 hour for a minimum distance of 10 feet (3048 mm) from the adjoining building and the entire length and span of the supporting elements for the fire-resistance-rated roof assembly...
-
11B-407.2.3.1 Floor designation
Applied plates are acceptable if they are permanently fixed to the jamb. [2010 ADA Standards] 407.2.3.1 Floor Designation....
-
11B-407.2.3.1 Floor designation
Applied plates are acceptable if they are permanently fixed to the jamb. [2010 ADA Standards] 407.2.3.1 Floor Designation....
-
Kawneer North America 1010 Sliding Mall Front
Key Features Include: Available with both fixed and operable panels Accept glazing infills from less than 1/4" to 1" (6.4 to 25.4) 1-3/4" (44.5mm) sightline 1-3/4" (44.5mm)...
-
Unique Attractions
Unique Attractions There are amusement attractions that are not specifically addressed by the guidelines, for example, “virtual reality” rides when a device does not move on a fixed course...
-
Customer Premises Equipment (CPE)
Examples of CPE are telephones, routers, switches, residential gateways, set-top boxes, fixed mobile convergence products, home networking adaptors and Internet access gateways which enable...
-
NPRM and Comments
The NPRM asked whether there should be any specific requirements for bus rapid transit (BRT) systems, which share some of the characteristics of fixed-route bus systems and some characteristics...
-
12142(a) Purchase and lease of new vehicles
(a) Purchase and lease of new vehicles It shall be considered discrimination for purposes of section which operates a fixed route system to purchase or lease a new bus, a new rapid rail...
-
12142(c)(2)(A) General rule
(A) General rule If a public entity operates a fixed route system any segment of which is included on the National Register of Historic Places and if making a vehicle of historic character...
-
Other Requirements [4.11.2]
(It also covers inclined stairway chairlifts, but this type of lift, if the chair is fixed in place, does not meet ADAAG requirements for a platform that accommodates wheelchairs)....
-
11B-411.2.3.2 Car designation signs
Applied plates are acceptable if they are permanently fixed to the jamb....
-
§ 37.75(d)
(d) If a public entity operates a fixed route system, any segment of which is included on the National Register of Historic Places, and if making a vehicle of historic character used solely...
-
11B-411.2.3.2 Car designation signs
Applied plates are acceptable if they are permanently fixed to the jamb....
-
404.2.4.3 Recessed Doors and Gates
A door can be recessed due to wall thickness or because of the placement of casework and other fixed elements adjacent to the doorway....
-
803.1 General
Section 903.5 requires dressing room bench seats to be installed so that they are at the same height as a typical wheelchair seat, 17 inches (430 mm) to 19 inches (485 mm)....
-
Accessible Rides
Accessible Rides Each newly constructed or newly designed amusement ride must provide at least one wheelchair space, or at least one ride seat designed for transfer, or a transfer device...
-
803.1 General
Section 903.5 requires dressing room bench seats to be installed so that they are at the same height as a typical wheelchair seat, 17 inches (430 mm) to 19 inches (485 mm)....
-
803.1 General
Section 903.5 requires dressing room bench seats to be installed so that they are at the same height as a typical wheelchair seat, 17 inches (430 mm) to 19 inches (485 mm)....
-
§382.31(b)
(b) You may charge a passenger for the use of more than one seat if the passenger's size or condition (e.g., use of a stretcher) causes him or her to occupy the space of more than one seat...
-
c. i.
Provide integrated wheelchair seating areas for two wheelchairs and two companion seats at the following locations: a. "21st Century" Theater; b....
-
§ 37.167(j)(1)
(1) When an individual with a disability enters a vehicle, and because of a disability, the individual needs to sit in a seat or occupy a wheelchair securement location, the entity shall...
-
Corbin Russwin Inc. UT5200 Unit Lock
Its pre-assembled, unitized construction is ideal for projects where installation costs are to be minimized....
-
PEMKO 2" to 48" Aluminum Plates No. 14/1
Cover Plate Assemblies are available for use whenever an unusual floor condition occurs....
