Openings providing entry to wheelchair spaces on amusement rides shall be 32 inches (815 mm) minimum clear....
Search Results "Door Opening Force"
-
Ride Entry: ADA Standard Section 1002.4.5
-
11B-1002.4.5 Ride entry
Openings providing entry to wheelchair spaces on amusement rides shall be 32 inches (813 mm) minimum clear....
-
11B-1002.4.5 Ride entry
Openings providing entry to wheelchair spaces on amusement rides shall be 32 inches (813 mm) minimum clear....
-
ENTRANCE
An entrance includes the approach walk, the vertical access leading to the entrance platform, the entrance platform itself, vestibule if provided, the entry door or gate, and the hardware...
-
1009.4.2 Area of refuge
Exceptions: Areas of refuge are not required at the elevator in open parking garages....
-
M305.2 Transfer Supports
Transfer Supports M305.2.2 Transfer Supports Structural Strength Proposed requirement: Transfer supports and their connections shall be capable of resisting vertical and horizontal forces...
-
U.N. Convention on the Rights of Persons with Disabilities (CRPD)
This is the highest number of signatories in history to a UN Convention on its opening day....
-
Car Controls [4.10.12]
Recommendations: Buttons on front panels should be located as close to the door as possible, rather than near the comer....
-
3. The Legislative History of the ADA
1990, it was leaving open the door for the Department to require captioning in the future as the technology developed. ...
-
Faucets: ADA Standard Section 606.4
Section 606.4 covers the current ADA Standards for the faucet controls of lavatories and sinks.
-
11B-809.10.7.5 Controls
The force required to activate controls shall be 5 pounds (22.2 mm) maximum....
-
1015.2 Where required
Guards shall be located along open-sided walking surfaces, including mezzanines, equipment platforms, aisles, stairs, ramps and landings that are located more than 30 inches (762 mm) measured...
-
a. Structural Strength
The MDE NPRM proposed to require transfer supports to be capable of resisting vertical and horizontal forces of 250 pounds at all points (proposed M305.2.2)....
-
Rebuilding Together Montgomery County - Gaithersburg, MD
Rebuilding Together Montgomery County (RTMC), a member of the Rebuilding Together network, opened its doors in 1990 and, over the past 25 years, has worked to provide free critical home...
-
4.26.3 STRUCTURAL STRENGTH
(3) Shear force induced in a fastener or mounting device from the application of 250 lbf (1112N) shall be less than the allowable lateral load of either the fastener or mounting device...
-
11B-606.4 Faucets
Hand-operated metering faucets shall remain open for 10 seconds minimum....
-
11B-809.9.6 Controls
Hand-operated metering faucets shall remain open for 10 seconds minimum....
-
11B-809.9.6 Controls
Hand-operated metering faucets shall remain open for 10 seconds minimum....
-
11B-606.4 Faucets
Hand-operated metering faucets shall remain open for 10 seconds minimum....
-
J4
Does the water rise at least 4 inches high when no more than 5 pounds of force is applied to the controls of the fountain? [ADA Standards §§ 4.15.3 and 4.15.4] Yes No...
-
9.2* POST OFFICE LOBBIES
(1) All fixed partitions must be installed to withstand a 250-pound force applied at any point and from any direction....
-
11B-610.4 Structural strength
Allowable stresses shall not be exceeded for materials used when a vertical or horizontal force of 250 pounds (1112 N) is applied at any point on the seat, fastener, mounting device, or...
-
903.6 Structural Strength
Allowable stresses shall not be exceeded for materials used when a vertical or horizontal force of 250 pounds (1112 N) is applied at any point on the seat, fastener, mounting device, or...
-
610.4 Structural Strength
Allowable stresses shall not be exceeded for materials used when a vertical or horizontal force of 250 pounds (1112 N) is applied at any point on the seat, fastener, mounting device, or...
