(1) In sleeping rooms with more than twenty-five beds covered by this section, a minimum of five percent (5%) of the beds shall have clear floor space complying with section 806.2.3....
Search Results "Clear Width"
-
§ 36.406(d)(1)
-
§ 35.151(e)(1)
(1) In sleeping rooms covered by this section with more than twenty-five beds, five percent (5%) minimum of the beds shall have clear floor space complying with section 806.2.3....
-
4.2.3* Wheelchair Turning Space
The space required for a wheelchair to make a 180-degree turn is a clear space of 60 in (1525 mm) diameter (see Fig. 3(a)) or a T-shaped space (see Fig. 3(b))....
-
4.2.3* WHEELCHAIR TURNING SPACE
The space required for a wheelchair to make a 180-degree turn is a clear space of 60 in (1525 mm) diameter (see Fig. 3(a)) or a T-shaped space (see Fig. 3(b))....
-
Location Above Detectable Elements
Objects located above elements that are within can sweep can protrude 4” maximum from the leading edge of such elements provided that any required reach or clear floor space is not obstructed...
-
405.7.4 Change in Direction
Ramps that change direction between runs at landings shall have a clear landing 60 inches (1525 mm) minimum by 60 inches (1525 mm) minimum....
-
Personalized Funding Solutions: A Criteria-Based Review of What Actually Holds Up
In evaluating these systems, I look for balance: clear identity verification, stated review timelines, and transparent document handling policies....
-
Unleash Your Inner Strategist: Diving into the Addictive World of Block Blast
The main objective is to place different shaped blocks onto a grid and complete full rows or columns to clear space and earn points....
-
Transfer Surface Size: Equipment Used by Patients in a Seated Position (M302.2.2)
The 21 inches minimum width is based on the ideal chair width recommended in Architectural Graphic Standards for auditorium seating....
-
11B-404.2.10 Door and gate surfaces
Swinging door and gate surfaces within 10 inches (254 mm) of the finish floor or ground measured vertically shall have a smooth surface on the push side extending the full width of the door...
-
Door and Gate Surfaces: ADA Standard Section 404.2.10
Section 404.2.10 covers the current ADA Standards for door and gate surfaces on manual doors and gates.
-
11B-404.2.10 Door and gate surfaces
Swinging door and gate surfaces within 10 inches (254 mm) of the finish floor or ground measured vertically shall have a smooth surface on the push side extending the full width of the door...
-
Shared Use Paths: ADA Standard Section 2.
rights-of-way guidelines, which address access to sidewalks, streets, and other pedestrian facilities, provide requirements for pedestrian access routes, including specifications for route width...
-
Uniform Federal Accessibility Guidelines (UFAS)
Section 4.13 of the ADA Standards tells you the technical provisions for doors that are specific requirements, such as the required clear passage width of a doorway. 3 The elevator...
-
Boarding Piers at Boat Launch Ramps
Because the entire chain also functions as a boarding pier, it must comply with all ADAAG provisions, including the 60-inch minimum clear pier width provision....
-
Pressalit Care PLUS Support Arm Height and Sideways Adjustable Swing Grab Bar
Support arm, 925 mm, ergonomically shaped to provide a clear sense of where the support arm ends. Right hand operated. Height adjustable by 240 mm and sideways adjustable....
-
Pressalit Care PLUS Support Arm Height Adjustable Swing Grab Bar
Support arm, 882 mm, ergonomically shaped to provide a clear sense of where the support arm ends. Right hand operated. Height adjustable by 240 mm without using tools....
-
Usable Door
One commenter stated that a clear definition of "usable door" is required. Response....
-
306.2.3 Minimum Required Depth
Where toe clearance is required at an element as part of a clear floor space, the toe clearance shall extend 17 inches (430 mm) minimum under the element....
-
Re: what is the location of Neil Island and why is it popular?
The focus on crystal-clear waters and coral reefs makes this place sound like a dream for anyone who enjoys marine life....
-
11B-308.3.1 Unobstructed
Where a clear floor or ground space allows a parallel approach to an element and the side reach is unobstructed, the high side reach shall be 48 inches (1219 mm) maximum and the low side...
-
4.7.10 Diagonal Curb Ramps
The bottom of diagonal curb ramps shall have 48 in (1220 mm) minimum clear space as shown in Fig. 15(c) and (d)....
-
Diagonal Curb Ramps [§406.6]
Diagonal Curb Ramps [§406.6] If curb ramps are placed diagonally at an intersection, it is important that clear space 48” long min. is available at the bottom that is outside active...
-
Pay Stations
Require-ments [sic] for operable parts cover clear floor space, operating characteristics, and location within accessible reach ranges....
