Grade 1 Heavy-Duty Mortise Locksets The DORMA M9000 Series Grade 1 heavy-duty mortise locksets provide exceptional security, enhanced aesthetics, and rugged dependability. These...
Search Results "Side-Opening Door"
-
DORMA M9000 Series Heavy-Duty Mortise Locksets
-
Yale 4800LN Series Interconnected Locksets
The Yale® 4800LN series interconnected locksets combine our key-in-lever locksets with the added safety and security of a deadbolt. From the inside, both the latchbolt and the...
-
TownSteel XME9010 Mortise Lockdown Rigid Trim Keypad Mortise
supply: 4AA battery Battery life: Up to 2 years Operating temperature: -31° to 151° F (-35° to 66°C) Certifications: FCC Part 15, UL 10C, ANSI/BHMA A156.13 Mechanical Specifications Door...
-
711.4.4 Ducts and air transfer openings
Penetrations of horizontal assemblies by ducts and air transfer openings that are not required to have dampers shall comply with this section....
-
Allegion Falcon 1590 Series Exit Devices
Sizes: 36", 42", 48" Doors: 1 3/4" thick metal or wood, specify if other than 1 3/4" Projections: 2 3/4" maximum, 2" when dogged....
-
Employee Work Areas: ADA Standard Section 203.9
Section 203.9 covers scoping requirements of general exceptions for employee work areas in the most current ADA Standards.
-
2. What are examples of auxiliary aids and services for students with hearing, vision, and speech disabilities?
., CART), assistive listening systems, accessible electronic and information technology, and open and closed captioning....
-
408.4.1 Car Dimensions and Doors
408.4.1 Car Dimensions and Doors. Elevator cars shall provide a clear width 42 inches (1065 mm) minimum and a clear depth 54 inches (1370 mm) minimum....
-
M305.2.8 Fittings
Transfer supports shall not rotate within their fittings when in place for transfer.
-
M305.2.7 Clearance
Clearance between the transfer support gripping surface and adjacent surfaces or obstructions shall be 1 ½ inches (38 mm) minimum.
-
M305.2.7 Clearance (Section-by-Section Analysis)
In the MDE NPRM, the Access Board did not provide any specific requirements for clearances around the transfer support. However, in the preamble to the MDE NPRM the Access Board...
-
5.4.10 Transfer Support Fittings Recommendations for M301 and M302
5.4.10 Transfer Support Fittings Recommendations for M301 and M302 Description: To ensure safe and effective transfers, transfer supports must not rotate within their fittings...
-
18 Inch Low Height
18 Inch Low Height As our discussions progressed on the low height, whether it should be 17 inches, 18 inches or 19 inches; a compromise position of 18 inches was suggested. Some...
-
Height – M301.2.1 & M302.2.1
Height – M301.2.1 & M302.2.1 The subcommittee discussed the increments for adjustability and decided that infinite adjustability is the appropriate standard as both electronic...
-
19 Inch Low Height
19 Inch Low Height Although the subcommittee’s conversations were complex and far-reaching, the following points summarize the factors that lead to the selection of the 19 inch...
-
17 Inch Low Height
17 Inch Low Height A portion of the Committee maintained that a height range of 17 inches - 25 inches would accommodate a significant portion of people with disabilities. Data...
-
M305.2.3 Fittings
Transfer supports shall not rotate within their fittings.
-
TownSteel XME9040 Mortise, Clutched Trim Security Cylinder Mortise Keypad
supply: 4AA battery Battery life: Up to 2 years Operating temperature: -31° to 151° F (-35° to 66°C) Certifications: FCC Part 15, UL 10C, ANSI/BHMA A156.13 Mechanical Specifications Door...
-
Sargent 8200 Mortise Lock with BHW Trim
Microshield, an antimicrobial coating 6 Lobe head security screws (Torx type) Matching thumbturn available Patent Pending Ideally suited for: Behavioral Health Units, Patient Room Doors...
-
11B-203.9 Employee workstations
207.1 _|Accessible Means of Egress; General|_, 11B-215.3 _|Fire Alarm Systems; Employee Work Areas|_, 11B-302 _|Floor or Ground Surfaces|_, 11B-303 _|Changes in Level|_, and 11B-404.2.3 _|Doors...
-
Hager Companies Five Knuckle - Half Surface Swing Clear Hinge BB1270
Reversible - For use in hospitals or other institutional type buildings Material: - Steel with Steel pin Finishes: - USP, US10, US10A, US10B, US26D Note: - When opened...
-
Hager Companies Three Knuckle - Full Surface Swing Clear Hinge AB7523
Reversible - For use in hospitals or other institutional type buildings Material: - Steel with Steel pin Finishes: - USP, US10, US10A, US10B, US26D Note: - When opened...
-
Hager Companies Five Knuckle - Full Surface Swing Clear Hinge BB1266
Reversible - For use in hospitals or other institutional type buildings Material: - Steel with Steel pin Finishes: - USP, US10, US10A, US10B, US26D Note: - When opened...
