The lift platform (not including the entrance ramp) shall not deflect more than 3 degrees (exclusive of vehicle roll or pitch) in any direction between its unloaded position and its position...
Search Results "Curb Ramp Bottom Landing"
-
§ 38.23(b)(9) Platform deflection
-
11B-407.4.10 Support rail
Support rails in elevator cabs are used in a different way than handrails along a walking surface such as a ramp or stairway....
-
§ 38.125(b)(9) Platform deflection
The lift platform (not including the entrance ramp) shall not deflect more than 3 degrees (exclusive of car roll) in any direction between its unloaded position and its position when loaded...
-
206.7.9 Team or Player Seating
While the use of platform lifts is allowed, ramps are recommended to provide access to player seating areas serving an area of sport activity....
-
Current Accessibility Guidelines That Apply to the Forest Service
The Forest Service and those working with or for the Forest Service on National Forest System land must comply with the following enforceable guidelines and standards when designing, constructing...
-
Bobrick Surface-Mounted Multi-Roll Toilet Tissue Dispenser B-4288
Extra roll automatically drops in place when bottom roll is depleted. Theft-resistant, heavy-duty spindles. Unit 6 1⁄16" W, 11" H, 5 15⁄16" D (155 x 280 x 150mm)....
-
Pilot Rock Varmint Defiant Trash Can Cover
The retainer ring keeps animals from knocking the can out at the bottom. This Cover keeps trash out of reach and puts the door at a comfortable height for depositing trash....
-
Bobrick Recessed Paper Towel Dispenser B-318
Towels load into bottom of cabinet concealed behind wall or mirror; only the towel tray is visible....
-
11B-308.3.1 Unobstructed
Operable parts of fuel dispensers shall be permitted to be 54 inches (1372 mm) maximum measured from the surface of the vehicular way where fuel dispensers are installed on existing curbs...
-
RETURNING HOME
If a ramp has been destroyed, an individual with a mobility impairment will be unable to get into and out of the house....
-
Accessible Route to Play Components
at least three of the elevated play components connected by the ramp are different types of play components....
-
Weight Scales
Wheelchair Scales Products Products in Sample Lower Cost Products MSRP Higher Cost Products MSRP Mechanical with Ramped Platform 2 2 $1,200...
-
USDA Forest Service Built Environment Image Guide (BEIG)
The goal of BEIG is to influence the design, construction, and maintenance of buildings and other constructed features so they will: Fit on the land Reflect sensitive site planning...
-
ASME
standard includes additional provisions for runway enclosures, electrical equipment and wiring, structural support, headroom clearance (which is 80 inches minimum), lower level access ramps...
-
Panda US-51 All Aluminum ULTRA Folding Door System
The multi-point locks engage into the top and bottom tracks for increased security....
-
§ 38.159(a)(1) General
., lift or ramp) complying with paragraph (b) or (c) of this section and sufficient clearances to permit a wheelchair or other mobility aid user to reach a securement location....
-
American Specialties Angle Frame Mirror 0600
Mirror is installed on concealed hanging bracket that locks onto top and bottom of frame by tamper-proof set screws....
-
Gamco Surface-Mounted Paper Cup Dispenser - CD-1
Unit is adjustable to dispense 3- to 6-oz (0.1- to 0.2‑L) paper or plastic flat-bottom cups....
-
M305.2.6 Gripping Surfaces (Section-by-Section Analysis)
The Committee recommended requiring the bottom of the transfer support to have no obstructions affecting more than 20 percent of the transfer support’s length. Id....
-
Horse Accessible Gates
The bottom log should be removed from the gate shown in figure 6 because the log could be a tripping hazard and it prevents wheelchair access....
-
404.2.7 Door and Gate Hardware
existing glazed doors without stiles, existing overhead rolling doors or grilles, and similar existing doors or grilles that are designed with locks that are activated only at the top or bottom...
-
Resting Intervals [1016.8]
Resting intervals are required at the top and bottom of an ORAR section any time the running slope exceeds 1:20 (5 percent)....
-
Utility Sinks
Ensure that the height of the counter or rim surrounding the utility sink is not more than 34 inches (865 millimeters) above the ground or floor space and that the bottom of the bowl is...
-
1136A.1 Receptacle heights
communication system receptacles shall be located no more than 48 inches (1219 mm) measured from the top of the receptacle outlet box nor less than 15 inches (381 mm) measured from the bottom...
