Toilet and bathing facilities serving the area of alteration • Drinking fountains serving the area of alteration • Public telephones serving the area of alteration • Exterior or interior...
Search Results "ASID: American Society of Interior Designers"
Commonly Searched Documents
-
4. COMMON PATH OF TRAVEL ITEMS
-
11B-220.1 Automatic teller machines and fare machines
If a bank provides both interior and exterior ATMs, each such installation is considered a separate location....
-
11B-404.2.4.3 Recessed doors and gates
Maneuvering clearances for forward approach shall be provided when any obstruction within 18 inches (457 mm) of the latch side at an interior doorway, or within 24 inches (610 mm) of the...
-
11B-220.1 Automatic teller machines and fare machines
If a bank provides both interior and exterior ATMs, each such installation is considered a separate location....
-
11B-404.2.4.3 Recessed doors and gates
Maneuvering clearances for forward approach shall be provided when any obstruction within 18 inches (457 mm) of the latch side at an interior doorway, or within 24 inches (610 mm) of the...
- GSA Section 508 Tutorials, Guidance, Checklists
- Yale 51 Series Industrial Door Closer
- Persons Assuming Control of their Environment (PACE) - Urbana, IL
-
11B-407.4.6.2 Buttons
Car control buttons with floor designations shall comply with Section 11B-407.4.6.2. Exception: Reserved....
- TownSteel MS Series, Grade 1 Sectional, with Indicator Mortise Locks
- Allegion Schlage S-Series Mechanical Locks with Tubular Interconnect
- TownSteel MS Series, Grade 1 Escutcheon, with Indicator Mortise Locks
- GE Cafe™ Series 30" Free-Standing Gas Double Oven with Convection Range CGS990SETSS
- Division of Vocational Rehabilitation (DVR) - Florida
-
Transfer Height: ADA Standard Section 1002.5.2
The height of amusement ride seats designed for transfer shall be 14 inches (355 mm) minimum and 24 inches (610 mm) maximum measured from the surface of the load and unload area....
-
[ADA Title III §36.104] 1991 Standards
[ADA Title III §36.104] 1991 Standards means requirements set forth in the ADA Standards for Accessible Design, originally published on July 26, 1991, and republished as Appendix D to this...
-
11B-1002.5.2 Transfer height
The height of amusement ride seats designed for transfer shall be 14 inches (356 mm) minimum and 24 inches (610 mm) maximum measured from the surface of the load and unload area....
-
11B-243.1 General
Where shooting facilities with firing positions are designed and constructed at a site, at least 5 percent, but no fewer than one, of each type of firing position shall comply with Section...
-
1.1 Knowing Your Rights and Responsibilities
Just as you are the expert on your body, you should also know your rights under the Americans with Disabilities Act (ADA) and about other information that will help you get equal access...
-
I. Introduction
Introduction Dialing 9-1-1 is the most familiar and effective way Americans have of finding help in an emergency....
-
§ 382.23 Airport facilities
this Air Carrier Access Act obligation if they meet requirements applying to places of public accommodation under Department of Justice (DOJ) regulations implementing Title III of the Americans...
-
What terms will let people know whether our facility is accessible?
The Americans with Disabilities Act (ADA) is not an accessibility guideline, it is a law....
-
Introduction
museums have legal obligations to provide and maintain accessibility for visitors with disabilities: Privately operated museums are covered as public accommodations under title III of the Americans...
-
Standards Applicable Under Section 504 as of March 15, 2012
This is the “American National Standards Specifications for Making Buildings and Facilities Accessible to, and Usable by, the Physically Handicapped,” published by the American National...