Where all seats in an assembly area are served by an induction loop assistive listening system, the minimum number of receivers required by Table F219.3 to be hearing-aid compatible shall...
Search Results "Seat Designation"
-
F219.3 Receivers
-
§382.85(c)
(c) If you assign seats to passengers, but not until the date of the flight, you must use the “priority seating” approach of section 382.83(a)(2)....
-
§382.83(b)
(b) If you assign seats to passengers, but not until the date of the flight, you must use the “priority seating” approach of paragraph (a)(2) of this section....
-
Section 4.1.3, Accessible Buildings: New Construction (Preamble, Section-by-Section Analysis)
In addition, if a building is designed to provide access to enclosed parking, pedestrian tunnels, or elevated walkways, at least one entrance that serves each such function must be accessible...
-
Section 4.1.3, Accessible Buildings: New Construction (Section-By-Section Analysis and Response to Comments)
In addition, if a building is designed to provide access to enclosed parking, pedestrian tunnels, or elevated walkways, at least one entrance that serves each such function must be accessible...
-
4. On-board wheelchairs
The Foreign Carriers NPRM proposed that this requirement apply on aircraft with 50 or more seats, as distinct from the criterion of more than 60 seats in the existing regulation....
-
Addendum A: List of Terms
Non-level Transfer- A transfer where the transfer surface is higher or lower than the wheelchair seat to floor height....
-
Vertical Wheelchair Lifts
Vertical lifts are intended for people who use wheelchairs although others may be able to use them under the ASME code if a seat is provided....
- Landscape Forms Inc. Parc Vue Bench Collection
- Landscape Forms Inc. Gus Bench Collection
- Department of Transportation: Disability Training Materials and Helpful Information
-
903.4 Back Support
Back support shall be 42 inches (1065 mm) long minimum and shall extend from a point 2 inches (51 mm) maximum above the seat surface to a point 18 inches (455 mm) minimum above the seat...
- Pilot Rock AT Series Traditional A-Frame Picnic Table With Steel Braces - Using Recycled Plastic
- Pilot Rock UT Series Side Accessible Picnic Table Using Recycled Plastic
- Landscape Forms Inc. 35 Sit bench
-
Birthing Room Bath Tub Accessibility
Birthing Room Bath Tub Accessibility Question was raised about a new Birthing Facility in design review in California Private company (not affiliated with a Hospital) Birthing facility...
-
1009.2.3 Clear Deck Space
On the side of the seat opposite the water, a clear deck space shall be provided parallel with the seat....
-
§ 36.302(f)(5)(iii)(B) Series-of-events tickets when ownership rights are attached
When series-of-events tickets with an ownership right in accessible seating areas are forfeited or otherwise returned to a public accommodation, the public accommodation shall make reasonable...
-
§ 35.138(e)(3)(ii)
When series-of-events tickets with an ownership right in accessible seating areas are forfeited or otherwise returned to a public entity, the public entity shall make reasonable modifications...
-
11B-1009.2.3 Clear deck space
On the side of the seat opposite the water, a clear deck space shall be provided parallel with the seat....
-
11B-1009.2.3 Clear deck space
On the side of the seat opposite the water, a clear deck space shall be provided parallel with the seat....
-
Location: ADA Standard Section 407.2.1.4
Section 407.2.1.4 covers the current ADA Standards for the location of elevator call controls.
-
T303 Handrails, Stanchions, and Handholds
We received only one comment on the proposed technical requirements in the 2010 NPRM related to the cross section of seat-back handholds....
-
ASME
ASME A17.1 is used by local jurisdictions throughout the United States for the design, construction, installation, operation, inspection, testing, maintenance, alteration, and repair of...