Wheelchair spaces shall be dispersed vertically at varying distances from the screen, performance area, or playing field....
Search Results "Ground Level Play Component"
Commonly Searched Documents
-
11B-221.2.3.2 Vertical dispersion
-
7.1 Basic Understanding of Diagnostic Imaging Equipment
compact and mobile imaging technologies such as ultrasound and echocardiography machines, the imaging equipment covered by the accessibility standards is part of a system of interacting components...
-
1002.4.4.3 Permitted Protrusions in Wheelchair Spaces
permitted to protrude a distance of 6 inches (150 mm) maximum along the front of the wheelchair space, where located 9 inches (230 mm) minimum and 27 inches (685 mm) maximum above the floor or ground...
-
307.4 Vertical Clearance
The leading edge of such guardrail or barrier shall be located 27 inches (685 mm) maximum above the finish floor or ground....
-
602.2 Clear Floor Space
Units shall have a clear floor or ground space complying with 305 positioned for a forward approach and centered on the unit....
-
11B-602.2 Clear floor space
Units shall have a clear floor or ground space complying with Section 11B-305 positioned for a forward approach and centered on the unit....
-
4.8.1 General
One fixed showerhead shall be 48 inches (1220 mm) above the floor or ground surface, and one fixed shower head shall be 72 inches (1830 mm) minimum above the floor or ground surface....
-
1011.7 Outdoor Rinsing Showers
The hand-held shower spray unit is required to have at least one fixed position located 15 inches minimum and 48 inches maximum above the ground....
-
11B-1002.4.4.3 Permitted protrusions in wheelchair spaces
permitted to protrude a distance of 6 inches (152 mm) maximum along the front of the wheelchair space, where located 9 inches (229 mm) minimum and 27 inches (686 mm) maximum above the floor or ground...
-
11B-1002.4.4.3 Permitted protrusions in wheelchair spaces
permitted to protrude a distance of 6 inches (152 mm) maximum along the front of the wheelchair space, where located 9 inches (229 mm) minimum and 27 inches (686 mm) maximum above the floor or ground...
-
11B-602.2 Clear floor space
Units shall have a clear floor or ground space complying with Section 11B-305 positioned for a forward approach and centered on the unit....
-
412.1.1 Digital Television Tuners (Section-by-Section Analysis)
412.1.1 Digital Television Tuners (Section-by-Section Analysis) This section proposes that, where audio description is played through a digital television tuner, that such tuner conform...
-
Course Barriers
These dispersed openings will provide access to the course at reasonable intervals, enabling a golfer using a golf car to play the game without extended travel distances and time requirements...
-
E.4. - What are examples of issues an agency may wish to consider when drafting a solicitation to acquire EIT?
Such offers will be considered to have met the provisions of the Access Board’s standards for the feature or component providing equivalent facilitation....
-
Stairs and Escalators in Existing Buildings: ADA Standard Section 206.2.3.1
Section 206.2.3.1 covers the scoping requirements for accessible routes between stairs and escalators in existing buildings.
-
309.2 Clear Floor Space
A clear floor or ground space complying with 305 shall be provided....
-
5.2.2 Transfer Surface Size Recommendations for M302
The transfer surface size has two components: width and depth. (See Figure 5.2.1.1) NPRM Proposed Provision: M302.2.2 Size....
-
2. Analytical Framework
Section 2.2 outlines the individual components of the total costs. ...
-
§ 37.7(b)(6)
(6) Determinations of equivalent facilitation are made only with respect to vehicles or vehicle components used in the provision of transportation services covered by subpart D or subpart...
-
B.6.iii. - Is undue burden the only grounds for acquiring EIT that does not meet the applicable technical provisions?
No. There are several exceptions to the requirements of Section 508 (see section G).
-
Test Procedures
Forest Products Laboratory staff visited the sites at least weekly for the first 2 months and at least monthly thereafter (if the ground was thawed) to complete the rotational penetrometer...
-
Standards
Numbers ASTM E 1486 - 98 (2004) Standard Test Method for Determining Floor Tolerances Using Waviness, Wheel Path and Levelness Criteria ASTM E 1486M - 98 (2004) Standard...
- Magnuson Group VESUVIO Ash Trays
-
Stages.
Without access to the witness stand, for example, a wheelchair user, or a witness who uses other mobility devices such as a walker or crutches, may have to sit at floor level. ...