Such level changes may need to be in close proximity, such as at raised thresholds (otherwise a minimum 48” separation will provide enough wheelchair space so that only one vertical change...
Search Results "Raised Judging Area"
Filters
Commonly Searched Documents
-
Is there a minimum distance between changes in level?
-
11B-407.2.1.2 Size and shape
Call buttons shall have square shoulders, be ¾ inch (19.1 mm) minimum in the smallest dimension and shall be raised 1/8 inch (3.2 mm) plus or minus 1/32 inch (0.8 mm) above the surrounding...
-
11B-703.5 Visual characters
Exception: Where visual characters comply with Section 11B-703.2 _|Signs; Raised Characters|_ and are accompanied by Braille complying with Section 11B-703.3, they shall not be required...
-
11B-707.9.1.1 Tactilely discernible numerical keypad
A tactilely discernible numerical keypad similar to a telephone keypad containing a raised dot with a dot base diameter between 1.5 mm and 1.6 mm and a height between 0.6 mm and 0.9 mm on...
-
11B-407.2.1.2 Size and shape
Call buttons shall have square shoulders, be ¾ inch (19.1 mm) minimum in the smallest dimension and shall be raised 1/8 inch (3.2 mm) plus or minus 1/32 inch (0.8 mm) above the surrounding...
-
11B-219.5 Permanent and portable systems
Permanently installed assistive-listening systems are required in areas if (1) they accommodate at least 50 persons or if they have audio-amplification systems, and (2) they have fixed seating...
-
Wheelchair Spaces: ADA Standard Section 221.2
Section 221.2 covers scoping requirements in the current ADA Standards for wheelchair spaces.
-
Walk
An exterior prepared surface for pedestrian use, including pedestrian areas such as plazas and courts....
-
T&W Traffic Control Retractable Cone Bar
Economical barrier for work zone areas. Fits all cone sizes. Restricts access to any work zone area. Sets up and tears down in seconds....
-
Implementation and Enforcement
If the United States believes that this Agreement or any portion of it has been violated, it will raise its concerns with LCG and the parties will attempt to resolve the concerns in good...
-
Amusement Ride
A system that moves persons through a fixed course within a defined area for the purpose of amusement....
-
ADDITION
[DSA-AC] An expansion, extension or increase in the gross floor area or height of a building or facility....
-
11B-812.8.6 Finish and size
Identification signs shall be reflectorized with a minimum area of 70 square inches (45161 mm2)....
-
240.2.1 Ground Level Play Components
Where two or more required ground level play components are provided, they shall be dispersed throughout the play area and integrated with other play components....
-
11B-240.2.1 Ground level play components
Where two or more required ground level play components are provided, they shall be dispersed throughout the play area and integrated with other play components....
-
F240.2.1 Ground Level Play Components
Where two or more required ground level play components are provided, they shall be dispersed throughout the play area and integrated with other play components....
-
240.2.1 Ground Level Play Components
Where two or more required ground level play components are provided, they shall be dispersed throughout the play area and integrated with other play components....
-
11B-240.2.1 Ground level play components
Where two or more required ground level play components are provided, they shall be dispersed throughout the play area and integrated with other play components....
-
11B-240.2.1 Ground level play components
Where two or more required ground level play components are provided, they shall be dispersed throughout the play area and integrated with other play components....
-
11B-106.5 Defined terms
CONSTRUCTION COST ADMINISTRATIVE AUTHORITY AISLE ALTERATION AMUSEMENT ATTRACTION AMUSEMENT RIDE AMUSEMENT RIDE SEAT ANSI APPROVED APPROVED TESTING AGENCY AREA...
-
11B-216.10 Assistive listening systems
Each assembly area required by Section 11B-219 to provide assistive listening systems shall provide signs informing patrons of the availability of the assistive listening system....
-
11B-232.2 General holding cells and general housing cells
Many detention and correctional facilities are designed so that certain areas (e.g., "shift" areas) can be adapted to serve as different types of housing according to need....
-
11B-233.3.1.2.6.2 Test number one, individual building test
For purposes of these requirements, vehicular or pedestrian site arrival points include public or resident parking areas, public transportation stops, passenger loading zones and public...
-
General: ADA Standard Section 216.1
Section 216.1 of the ADA Standards covers information in the current ADA Standards on scoping requirements for signs.
