It references dimensions of clearance height and depth to the dorsal foot point on a person (e.g., top of ankle)....
Search Results "Grab Bar Height"
Filters
Commonly Searched Documents
-
Knee Clearance: Clearance as Measured from Dorsal Foot Point - Manual Wheelchair
-
M303.2.4.2 Knee Clearance
Between 9 inches (230 mm) and 27 inches (685 mm) above the floor, the knee clearance shall be permitted to reduce at a rate of 1 inch (25 mm) in depth for every 6 inches (150 mm) in height...
-
11B-707.9.1.1 Tactilely discernible numerical keypad
A tactilely discernible numerical keypad similar to a telephone keypad containing a raised dot with a dot base diameter between 1.5 mm and 1.6 mm and a height between 0.6 mm and 0.9 mm on...
-
Mockett SDH1-SSS Sliding Door Hardware Set
Mounting brackets are anchored to the wall, holding the bar in place....
-
Pilot Rock M-32/17 Campfire Ring
The 300 sq. inch cooking grate is welded together using 5/8" dia. handle/support bars and 1/2" dia. grate bars, and includes handle grips of 1/8" x 1/2" coiled steel. ...
-
1. General Exception
Some specific examples include: Dual Energy X-Ray Absorptiometry (DXA) machines, with a mechanism that moves imaging components along a track beneath the patient surface precluding height...
-
Measuring Techniques
The design and placement of grab bars are also guided by strength capabilities, chiefly in the hands and arms....
-
§35.130(b)(8) (Section-by-Section Analysis)
It prohibits overt denials of equal treatment of individuals with disabilities, or establishment of exclusive or segregative criteria that would bar individuals with disabilities from participation...
-
Manual vs. Power (RMS Values)
However, Figure 20 does show the average seat RMS data for all of the surfaces with 95 percent confidence bars. Figure 20: Seat RMS values with 95 percent confidence bars ...
-
III−1.1000 General
Are continuing education courses sponsored by a State bar association subject to title III? Yes....
-
Activar Hiawatha 5-1/2P Series Pull with Matching Push Plate
• Plate & Pull Combinations • Standard Pulls • Push & Pull Bar Sets • Custom & Unique Pulls • Full Height Pulls • Door Protection Plates & Edges • Auto...
-
Standing Supports (M304.3 and M305.3)
Standing supports that adjust from horizontal to vertical positions and at angles in between, such as a bar that folds up and locks into multiple positions, can be used....
-
11B-104.1.1 Construction and manufacturing tolerances
Where the requirement states a specified range, such as in 609.4 where grab bars must be installed between 33 inches and 36 inches above the floor, the range provides an adequate tolerance...
-
III-4.4500 Priorities for barrier removal
. , lowering towel dispensers or installing grab bars) in each restroom?...
-
11B-104.1.1 Construction and manufacturing tolerances
Where the requirement states a specified range, such as in 609.4 where grab bars must be installed between 33 inches and 36 inches above the floor, the range provides an adequate tolerance...
-
Section 36.301 Eligibility Criteria (Preamble, Section-by-Section Analysis)
It would violate this section to establish exclusive or segregative eligibility criteria that would bar, for example, all persons who are deaf from playing on a golf course or all individuals...
-
Section 36.301 Eligibility Criteria (Section-By-Section Analysis and Response to Comments)
It would violate this section to establish exclusive or segregative eligibility criteria that would bar, for example, all persons who are deaf from playing on a golf course or all individuals...
-
Guardian Recessed Safety Station with Drain Pan GBF2173
ADA compliance: When installed at recommended mounting heights, unit complies with ADA requirements for accessibility by disabled persons....
-
Symmons Duro® Tub Shower System 3S603-H321-V
Single mode wall/hand shower with flexible metal hose, in-line vacuum breaker and wall connection. 30" slide bar for hand shower mounting....
-
Test Courses & Surfaces
Table 2 Reference Carpet and Pad Carpet Code Level loop, 100% nylon with a woven polypropylene backing; 0.16 in pile height; 28 oz pile weight C1...
-
4. Organization of Technical Criteria
equipment that is designed for use by patients seated in a wheelchair would have to meet the technical criteria for wheelchair spaces, changes in level at entry to the wheelchair space, and height...
-
b. A Qualified Person with a Disability
physical and communication barriers; and (3) providing auxiliary aids or services for effective communications.18 Essential eligibility requirements can include minimum age limits or height...
-
BACKGROUND
rooms, hospitals, and other medical settings.1 In response, the Access Board issued a notice of proposed rulemaking2 that, among other things, would specify a maximum lower adjustable height...
-
INVESTIGATION AND FINDINGS
On the basis of its investigation, the Department determined that Chicago Heights denied the Complainant appropriate auxiliary aids and services necessary for effective communication during...
