These requirements, or rules, clarify and refine issues that have arisen over the past 20 years and contain new, and updated, requirements, including the 2010 Standards for Accessible Design...
Search Results "Electroacoustic Performance Standards"
Filters
Commonly Searched Documents
-
ADA Requirements - Effective Communication
-
4. Overview of Equipment Types
Section 5 presents the detailed recommendations of the MDE Advisory Committee for MDE accessibility standards....
-
UNREASONABLE HARDSHIP
When the enforcing agency finds that compliance with the building standard would make the specific work of the project affected by the building standard infeasible, based on an overall evaluation...
-
Section 36.405 Alterations: Historic Preservation (Section-by-Section Analysis)
That provision referenced the 1991 Standards....
-
Inclined Wheelchair Lifts
The ASME standard allows inclined lifts with enclosures and those without....
-
Questionnaire
The first question, shown in Figure 4, was based on ASTM 1927-28: Standard Guide for Conducting Subjective Pavement Ride Quality Ratings....
-
228 Depository, Vending Machines, Change Machines, Mail Boxes and Fuel Dispensers
1991 Standards for Accessible Design 2010 Standards for Accessible Design What’s New/Different 228.2 Mail Boxes...
-
ADA Requirements - Service Animals
These requirements, or rules, clarify and refine issues that have arisen over the past 20 years and contain new, and updated, requirements, including the 2010 Standards for Accessible Design...
-
F. Assisted Listening Devices:
See the 2010 Standards §219.3. PSE shall ensure that the Assisted Listening Devices remain in good working order and any defects or issues are resolved expeditiously....
-
Appendix to Part 38—Guidance Material
, Apr. 16, 2014] This appendix contains materials of an advisory nature and provides additional information that should help the reader to understand the minimum requirements of the standards...
-
11B-404.2.4 Maneuvering clearances
[2010 ADA Standards] EXCEPTION: Entry doors to hospital patient rooms shall not be required to provide the clearance beyond the latch side of the door....
-
11B-407.2.1.2 Size and shape
[2010 ADA Standards] 407.2.1.2 Size. Call buttons shall be ¾ inch (19 mm) minimum in the smallest dimension. Exception: Reserved....
-
11B-407.2.1.5 Signals
[2010 ADA Standards] 407.2.1.5 Signals. Call buttons shall have visible signals to indicate when each call is registered and when each call is answered....
-
UNREASONABLE HARDSHIP
When the enforcing agency finds that compliance with the building standard would make the specific work of the project affected by the building standard infeasible, based on an overall evaluation...
-
11B-219.2 Required systems
[2010 ADA Standards] 219.2 Required Systems....
-
Section 1.0 Background
All of those countries have revised or are revising their standards based on that research....
-
Corada Product Certification Process
verification of a product's compliance with specified accessibility standards, codes, and normative documents....
-
Accessible Product Certification Process
verification of a product's compliance with specified accessibility standards, codes, and normative documents....
-
Transfer Sides (M301.2.3 and M302.2.3)
approach parallel to the deep dimension of the transfer surface, parallel to the wide dimension of the transfer surface, or at an angle to the corner of the transfer surface and be able to perform...
-
Study Limitations
When performing these transfers to a higher elevation participants could be transferring to a seat around 31.5 inches off the ground....
-
Section 35.150(b)(2) Safe Harbor (Section-by-Section Analysis)
, required to modify those elements in order to reflect incremental changes in the proposed standards. ...
-
II-6.5000 Alterations to historic properties
Under those provisions, alterations should be done in full compliance with the alterations standards for other types of buildings....
-
SERVICE ANIMALS
Service animals are defined as dogs that are individually trained to do work or perform tasks for a person with a disability....
-
M101.5 Dimensions
The MDE Standards are based on adult dimensions and anthropometrics. Dimensions that are not stated as “maximum” or “minimum” are absolute....
