Section 105.2.2 of the ADA Standards cover references to the American Society of Mechanical Engineers (ASME) standards.
Search Results "Bathtub Seat"
Commonly Searched Documents
-
ASME: ADA Standard Section 105.2.2
-
Water Closets and Toilet Compartments for Children's Use: ADA Standard Section 604.9
Section 604.9 covers the current ADA Standards for water closets and toilet compartments for children's use.
-
11B-608.2.2.1 Clearance
minimum side of the clearance provided that it is not on the side of the clearance adjacent to the controls or, where provided, not on the side of the clearance adjacent to the shower seat...
-
18. Where an existing ground level play component is replaced, should the new component comply with the technical provisions of Section 1008.4 even if there is not an accessible route to it?
In this case, the spring rocker being replaced would need to have the rocker seat height between 11 and 24 inches and clear floor or ground space and maneuvering space provided adjacent...
-
Receivers and Couplers
Receivers and Couplers ADAAG requires that receivers be provided to serve at least 4% of the total number of seats (but in no case fewer than two)....
-
Motorized Kick Scooters
Motorized scooters usually have hand brakes and often have larger, pneumatic rubber tires; and some have pedestal seats....
- Guldmann Basic High Bariatric Sling, 1100 lbs / 500 kg
- Guldmann Basic High Sling - Kids
-
Identification of accessible features in hotels and guest rooms. (Section-by-Section Analysis)
For example, under certain circumstances, an accessible hotel bathroom may meet accessibility requirements with either a bathtub or a roll-in shower....
- Landscape Forms Inc. Olithas Outdoor Bench
- Caroma® USA Caravelle Smart 270 One Piece Toilet
-
Storing Assistive Devices in the Aircraft Cabin
[Sec. 382.41(b)] You must permit passengers to stow their canes and other assistive devices in the cabin and close to their seats, consistent with FAA safety regulations concerning carry-on...
-
Issues Related to the Interactive Process and Return to Work
The employer asks if the employee could do seated work during the break; the doctor says yes....
-
Accessible Routes
For each accessible amusement ride, an accessible route is required to connect to a wheelchair space, a ride seat designed for transfer, or a transfer device for use with an amusement ride...
-
B.2.ii. - How should an agency proceed in identifying "applicable" technical provisions in Subparts B, C, and D of the Access Board’s standards to ensure acquired products provide comparable access?
For example, if an agency were to enter into a seat management contract for desktop computing resources, the hardware and software to be provided by the contractor would be required to meet...
- Adaptive Access
-
216 and 703 Signs
These types of signs include: seat and row designations in assembly areas; occupant names, building addresses; company names and logos; signs in parking facilities (except those identifying...
-
11B-209.4 Valet parking
Some vehicles may be adapted with hand controls or lack a driver’s seat, and may not be operable by a valet parking attendant....
-
Technical Memorandum TM 2013-11 Benches
Steam Rooms TAS 612.2 Dressing, Fitting, and Locker Rooms TAS 803.4 Holding Cells and Housing Cells TAS 807.2.2 Fixed or built-in benches and other types of fixed seating...
-
Access to Performing Areas [4.33.5]
While handrails are not required on ramps adjacent to assembly seating, locating aisles (including those that are stepped) along walls will permit handrails on one side for the benefit of...
-
Wheelchair Spaces
Wheelchair spaces should not overlap required exit widths or circulation paths and should provide for shoulder-to-shoulder alignment with occupants of adjacent seats (an important consideration...
-
Printable Room Layouts
If your meeting will have more than 10% of attendees using mobility devices or service animals, increase the number of accessible seating locations and aisle widths proportionally....
-
1009.3.3 Area of Refuge
Areas of refuge are not required for smoke-protected or open-air assembly seating areas complying with Sections 1029.6.2 and 1029.6.3....