(4) Mini-high platforms, with multiple mini-high platforms or multiple train stops, as needed, to permit access to all accessible cars available at that station; or...
Search Results "Public Transportation Stop"
-
§ 37.42(c)(4)
-
KEY STATION
[DSA-AC] Certain rapid and light rail stations, and commuter rail stations, as defined under criteria established by the Department of Transportation in 49 CFR 37.47 and 49 CFR 37.51, respectively...
-
KEY STATION
[DSA-AC] Certain rapid and light rail stations, and commuter rail stations, as defined under criteria established by the Department of Transportation in 49 CFR 37.47 and 49 CFR 37.51, respectively...
-
seca 684 r Digital Multifunctional Scale with Integrated RS232 Interface
Integrated transport castors allow for easy mobility....
-
QUESTION: WHEN A RAIL OPERATOR CONSTRUCTS A NEW STATION PLATFORM OR ALTERS AN EXISTING STATION PLATFORM, DOES 49 CFR PART 37 REQUIRE THE RAIL OPERATOR ENSURE THAT THE PLATFORM IS AT LEAST 8 INCHES ABOVE TOP OF RAIL, EVEN IF THE RAILROAD OPERATOR WILL PROVIDE ACCESSIBILITY CONSISTENT WITH THE REQUIREMENTS OF SECTION 37.42?
ANSWER: Public entities, such as Amtrak and commuter operators, must construct a new facility for use in designated public transportation so that it is readily accessible to and...
-
Enactment of the ADA and Issuance of the 1991 Regulations
accommodation, transportation, and other important areas of American life....
-
R209 Accessible Pedestrian Signals and Pedestrian Pushbuttons (Section-by-Section Analysis)
Technical assistance and training on the installation of accessible pedestrian signals and pedestrian pushbuttons is available from the Access Board and transportation industry professional...
-
§ 37.3 Commuter authority
Commuter authority means any state, local, regional authority, corporation, or other entity established for purposes of providing commuter rail transportation (including, but not necessarily...
-
409.4.4 Leveling
Each car shall automatically stop at a floor landing within a tolerance of ½ inch (13 mm) under rated loading to zero loading conditions....
-
Clear Width [4.13.5] and Vertical Clearance
Clear Width [4.13.5] and Vertical Clearance The clear width of the opening is measured from the face of the door in a 90 degrees open position to the opposite stop....
-
Undefined Terms: ADA Standard Section 106.3
Section 106.3 of the ADA Standards covers information on the undefined terms in the ADA Standards.
-
Section 37.3 Definitions
DOT is placing guidance on its Web site concerning the use of Segways in transportation vehicles and facilities....
-
3. New Construction vs. Alterations
post-ADA, they must include curb ramps or other sloped areas wherever they intersect with highways, streets, or roads and pedestrians may legally cross the vehicular way as well as at public...
-
General: ADA Standard Section 105.1
Section 105.1 of the ADA Standards covers information on the Referenced Standards throughout the ADA Standards.
-
Research Projects
The Board sponsors and coordinates research for use in developing accessibility guidelines and providing technical assistance to the public....
-
Research Projects
The Board sponsors and coordinates research for use in developing accessibility guidelines and providing technical assistance to the public....
-
NPRM and Comments
In a few cities, there are systems that use vintage inaccessible vehicles to provide regular public transit service....
-
Research Projects
Research Projects The Board sponsors and coordinates research for use in developing accessibility guidelines and providing technical assistance to the public....
-
4.1.2(8)
When a building or facility has entrances which normally serve any of the following functions: transportation facilities, passenger loading zones, accessible parking facilities, taxi stands...
-
Research Projects
The Board sponsors and coordinates research for use in developing accessibility guidelines and providing technical assistance to the public....
-
11B-1009.2.4 Seat
The height of the lift seat shall be designed to allow a stop at 17 inches (432 mm) minimum to 19 inches (483 mm) maximum measured from the deck to the top of the seat surface when in the...
-
11B-1009.2.4 Seat
The height of the lift seat shall be designed to allow a stop at 17 inches (432 mm) minimum to 19 inches (483 mm) maximum measured from the deck to the top of the seat surface when in the...
-
202.4 Alterations Affecting Primary Function Areas
In existing transportation facilities, an area of primary function shall be as defined under regulations published by the Secretary of the Department of Transportation or the Attorney General...
-
List of Subjects
Buildings Buses Civil Rights Handicapped Individuals with Disabilities Mass Transportation Railroads Reporting and recordkeeping...
