Such ANPRMs had no force or effect of law, and no party should rely upon them as presenting the Department of Justice’s position on these issues....
Search Results "Non-Positive Shut Off"
Filters
Commonly Searched Documents
-
Conclusion
-
Reasonable Accommodation
facilities used by employees readily accessible to, and usable by, an individual with a disability; job restructuring; modifying work schedules; reassignment to a vacant position...
-
1134A.4 Sufficient maneuvering space
The clear maneuvering space shall allow the user to position a wheelchair or other mobility aid clear of the path of the door as it is closed and to permit use of fixtures....
-
1002.4.3 Gaps
Floors of amusement rides with wheelchair spaces and floors of load and unload areas shall be coordinated so that, when amusement rides are at rest in the load and unload position, the vertical...
-
604.5.2 Rear Wall
Where an administrative authority requires flush controls for flush valves to be located in a position that conflicts with the location of the rear grab bar, then the rear grab bar shall...
-
1133B.2.5.1
If the door has a closer, then the sweep period of the closer shall be adjusted so that from an open position of 70 degrees, the door will take at least 3 seconds to move to a point 3 inches...
-
1002.2 Accessible Routes
Steeper slopes are permitted on accessible routes connecting the amusement ride in the load and unload position where it is "structurally or operationally infeasible."...
-
1002.2 Accessible Routes
Steeper slopes are permitted on accessible routes connecting the amusement ride in the load and unload position where it is "structurally or operationally infeasible."...
-
1002.5 Amusement Ride Seats Designed for Transfer
Amusement ride seats designed for transfer shall comply with 1002.5 when positioned for loading and unloading. Advisory 1002.5 Amusement Ride Seats Designed for Transfer....
-
1002.4.3 Gaps
Floors of amusement rides with wheelchair spaces and floors of load and unload areas shall be coordinated so that, when amusement rides are at rest in the load and unload position, the...
-
A4.30.1 General
Thus, signage positioned perpendicular to the path of travel is easiest for them to notice....
-
1.4.3. Notice Requirements
Despite this change, the Department maintains its position that any costs associated with the notice requirement are de minimis because indicating the availability of captioning and audio...
-
Tandem Bicycles
Tandem Bicycles Tandem bicycles (often called tandems) have positions for two cyclists; typically, the front rider (the "captain") is responsible for steering, balance, shifting,...
-
Epilogue
A whole host of circumstances worked in its favor: effective leadership; advocates in key government positions; the rightness of the cause; the mobilization of the grassroots disability...
-
Publicizing the ADA: Advocacy and the Government Response
As a consequence, ADA advocates successfully positioned the ADA for serious introduction in 1989....
-
4.20.2 Floor Space
floor space in front of a bathtub required by ADAAG (30"-48" min depth depending on the direction of travel by the length of the tub including a seat at the head of the tub) is based on positioning...
-
Limited-Use/ Limited-Application Elevators [§408]
requirements for doors and referenced ANSI/BHMA Standards for low-energy doors, and remain open for at least 20 seconds) Requirements are not included for door timing and delay or for car position...
-
Section 35.130(h) Safety. (Section-by-Section Analysis)
To ensure consistency between the title II and title III regulations, the Department has added a new § 35.130(h) in the final rule incorporating this longstanding position relating to imposition...
-
11B-1002.4.3 Gaps
Floors of amusement rides with wheelchair spaces and floors of load and unload areas shall be coordinated so that, when amusement rides are at rest in the load and unload position, the vertical...
-
11B-1002.4.3 Gaps
Floors of amusement rides with wheelchair spaces and floors of load and unload areas shall be coordinated so that, when amusement rides are at rest in the load and unload position, the vertical...
-
Character Specifications
For those with non-rectangular cross sections, the stroke thickness was specified to be 15% maximum of the character height (measured at the top of the cross section) and 10% to 30% (measured...
-
Chapter 1 GENERAL INFORMATION
In fact, more than one in seven non-institutionalized Americans ages 5 and over have some type of disability (13%); problems with walking and lifting are the most common....
-
Executive summary
We evaluated the impact of height differential, gap, placement of a non-removable armrest, and the effect of grab bars....
-
Comments
In September 2005, the Department issued guidance concerning non-traditional mobility devices....