At least one 30 in (760 mm) section of counter shall provide a work surface that complies with the following requirements (see Fig. 50):...
Search Results "Floor Surface"
Filters
Commonly Searched Documents
-
4.34.6.4 WORK SURFACES
-
SmartCells Flooring: Installation Video
Installation information for SmartCells Flooring...
-
Attachment I
of the ramp parallel with the ground surface. ...
-
Platform Size and Surface
Platform Size and Surface To be part of an accessible route, lift platforms must provide the amount of clear space required for wheelchairs in ADAAG 4.2.4....
-
1010.1.5 Floor elevation
There shall be a floor or landing on each side of a door. Such floor or landing shall be at the same elevation on each side of the door....
-
Floor Naming and Numbering
This is a little abstract one, but if you look at those elevator buttons, whether you’re in a building in San Francisco and you come in on the east side of the building and it’s Floor Level...
-
217.4.2 Floor Requirement
217.4.2 Floor Requirement. TTYs in public buildings shall be provided in accordance with 217.4.2.1. TTYs in private buildings shall be provided in accordance with 217.4.2.2....
-
Clear Floor Space [4.20.2]
Clear Floor Space [4.20.2] Clear floor space at tubs, which is dimensioned according to the approach, may overlap required turning space within the room....
-
Murdock Manufacturing Floor Mount, Wall Outlet Toilet
Product Details Mounting: Floor Mounted Material: Stainless Steel Style: Super Secur...
-
3.2 Getting on the Table
An accessible table is height adjustable to a minimum height of 17- 20 inches from the floor. ...
-
Arriving at the Polling Place: Parking
Accessible parking spaces and the access aisles serving them must be on a surface that is stable, firm, and slip resistant (e.g., clear of gravel or mud) without wide cracks or broken pavement...
-
Figure M5: Overview of M303 Diagnostic Equipment for Use by a Patient While Seated in a Wheelchair and 304 Diagnostic Equipment for Use by a Patient in a Standing Position (Mammography Machine Example)
Where the primary use of the equipment supports more than one patient position, it must comply with the requirements for each use. The mammography machine is usable by both people...
-
Sales and Service Elements and Spaces
[See subsections ...]
-
Table Surface Height
Persons with disabilities considered the 34 inch maximum height too high for surfaces used for any length of time....
-
Tactile Surface
The proposed rule included provisions that generally recognized alternative tactile surfaces equally detectable underfoot or other designs or technologies that provide equal or superior...
-
Plan 3A: 12-Foot Wide Accessible Guest Room
• Recessed lavatory with vanity countertop permits shorter rear grab bar at water closet (section 604.5.2); • Circular turning space in room (section 603.2.1); • Required clear floor...
-
Plan 1A: 13-Foot Wide Accessible Guest Room
section 607.2); • Recessed bathtub location permits shorter rear grab bar at water closet (section 604.5.2); • Circular turning space in room (section 603.2.1); • Required clear floor...
-
Plan 1B: 13-Foot Wide Accessible Guest Room
section 607.2); • Recessed bathtub location permits shorter rear grab bar at water closet (section 604.5.2); • Circular turning space in room (section 603.2.1); • Required clear floor...
-
1(2)(a)(i) Individual building test
(i) Individual building test. It is impractical to provide an accessible entrance served by an accessible route when the terrain of the site is such that: (A) the slopes of the...
-
Why a smooth surface door or kickplate is important
This video shows what can happen if the push side of a door near the floor isn't smooth. ...
-
Inpro Corporation ENDURANT® Floor-Mounted Overhead-Braced Partitions
Our floor-mounted overhead-braced privacy partitions are manufactured from BioPrism® Solid Surface featuring an industry leading bio-resin blend....
-
Boost Your Business - Chapter 9 - Restroom Clear Space
Boost Your Business - Chapter 9 - Restroom Clear Space
-
711.4.6 Floor fire doors
Floor fire doors used to protect openings in fire-resistance-rated floors shall be tested in the horizontal position in accordance with ASTM E 119, and shall achieve a fire-resistance rating...
