In the final rule, this provision has been revised to more clearly address situations where counters, appliances, or cabinets are opposite a parallel wall....
Search Results "Control End Wall"
-
804 Kitchens and Kitchenettes
-
1011.5 Fire Rings, Grills, Fireplaces, and Wood Stoves
Fire rings with double walls or insulation on the sides are recommended to prevent burns....
-
D. Toilet Centerline
Is each accessible toilet centered 18" from the adjacent side wall, which is the distance that will permit a person with a mobility impairment to use the grab bars?...
-
1011.5 Fire Rings, Grills, Fireplaces, and Wood Stoves
Fire rings with double walls or insulation on the sides are recommended to prevent burns....
-
4.34.6.1* CLEARANCE
Clearances between all opposing base cabinets, counter tops, appliances, or walls shall be 40 in (1015 mm) minimum, except in U-shaped kitchens, where such clearance shall be 60 in (1525...
-
1009.8.1.1 Visible communication method
Section 1138A.4 or Sections 11B-205 and 11B-309 in the area of refuge shall activate both a light in the area of refuge indicating that rescue has been requested and a light at the central control...
-
704 Telephones
Section 704 provides technical criteria for telephones, including provisions for wheelchair access (704.2), volume control (704.3), and TTYs (704.4)....
-
Stabila, Inc. Magnetic Tech Digital Electronic Level Type 96M-2
Electronic measuring technology / Two digital displays / Audible inclination guide / IP 65 Dust and Waterproof / Rare earth magnets for hands free use / Removable shock-absorbing end caps...
-
804.2.2 U-Shaped
In U-shaped kitchens enclosed on three contiguous sides, clearance between all opposing base cabinets, counter tops, appliances, or walls within kitchen work areas shall be 60 inches (1525...
-
2e
Is there a horizontal grab bar along each of the three shower walls at 33"-36" above the floor as shown in Figure 37(b) below?...
-
5. Grab Bar
Is there a horizontal grab bar on the wall alongside the shower seat (but not behind the shower seat) for stabilization and aid in transfer from a wheelchair to the folding shower seat?...
-
H16
Is the toilet stall at least 60 inches wide and 56 inches deep (wall mounted toilet) or 59 inches deep (floor mounted toilet)?...
-
11B-604.8.2.3 Grab bars
A side-wall grab bar complying with Section 11B-604.5.1 shall be provided on both sides of the compartment. FIGURE 11B-604.8.2 ‡‡ AMBULATORY ACCESSIBLE TOILET COMPARTMENT...
-
4.8.7 Edge Protection
Ramps and landings with drop-offs shall have curbs, walls, railings, or projecting surfaces that prevent people from slipping off the ramp....
-
Back Entry
Glass walls and ceiling to improve visual acuity Recessed area rug Grill in the fireplace for year round healthy cooking Automatic opener which can be operated...
-
4.8.7 EDGE PROTECTION
Ramps and landings with drop-offs shall have curbs, walls, railings, or projecting surfaces that prevent people from slipping off the ramp....
-
11B-804.2.2 U-Shaped
In U-shaped kitchens enclosed on three contiguous sides, clearance between all opposing base cabinets, counter tops, appliances, or walls within kitchen work areas shall be 60 inches (1524...
-
Clearance: ADA Standard Section 608.2.2.1
Section 608.2.2.1 covers the current ADA Standards for the clearances of standard roll-in type shower compartments.
-
302.7 With Limited Manipulation
Where a manual mode of operation is provided, ICT shall provide at least one mode of operation that does not require fine motor control or operation of more than one control at the same...
-
Master Bath
Water saving toilet with touch controls Universal faucet with touch controls Zenon lighting behind the mirror to control glare Radiant heat in the floor Quiet...
-
1009.8.1.1 Visible communication method
Sections 11B-205 and 11B-309 _|Operable Parts|_ in the area of refuge shall activate both a light in the area of refuge indicating that rescue has been requested and a light at the central control...
-
Hager Companies Round Push/Pull Bar Set 157D-V-B
Round Push/Pull Bar Set 157D-V-B D = Standard Fastening: - One (1) Type 7 spanner collar connection between push bar and pull plus two (2) Type 1 connections for other ends of...
-
Hager Companies Round Push/Pull Bar Set 164D-V-B
Round Push/Pull Bar Set 164D-V-B D = Standard Fastening: - One (1) Type 7 spanner collar connection between push bar and pull plus two (2) Type 1 connections for other ends of...
-
Hager Companies Round Push/Pull Bar Set 161D-V-B
Round Push/Pull Bar Set 161D-V-B D = Standard Fastening: - One (1) Type 7 spanner collar connection between push bar and pull plus two (2) Type 1 connections for other ends of...
