Since there is no practical way to provide an accessible route to any of the dwellings, one need not be provided....
Search Results "Interior Route"
-
§100.205(b)
-
Miracle Sealant Company 511 Anti-Slip Formula
All surfaces treated are less slippery SPECIAL FEATURES: Interior & Exterior Use • Weather Resistant • Easy-to-Use • Safe for Food Areas...
-
Soft Contained Play Structures
Soft contained play structures must provide at least one entry point on an accessible route when three or fewer entry points are provided....
-
Landings: ADA Standard Section 405.7
Section 405.7 covers the current ADA Standards for ramp landings.
-
11B-806.2.3.1 Personal lift device floor space
The clear space shall extend under the bed parallel to the long side and be adjacent to an accessible route....
-
11B-403.5.3 Passing spaces
An accessible route with a clear width less than 60 inches (1524 mm) shall provide passing spaces at intervals of 200 feet (60,960 mm) maximum....
-
11B-403.5.3 Passing spaces
An accessible route with a clear width less than 60 inches (1524 mm) shall provide passing spaces at intervals of 200 feet (60,960 mm) maximum....
-
STEP 2
needed based on Table 240.2.1.2: Table 240.2.1.2 Number of elevated play components provided Minimum number of ground-level play components required to be on accessible route...
-
Section G: Ramps
:_______________________________________ Location name:______________________ G Ramps Complete a separate ramp form for each ramp, whether exterior or interior...
-
11B-404.2.4.3 Recessed doors and gates
Maneuvering clearances for forward approach shall be provided when any obstruction within 18 inches (457 mm) of the latch side at an interior doorway, or within 24 inches (610 mm) of the...
-
218 and 810 Transportation Facilities
The 2010 Standards also delete the requirement for the material used to contrast in resiliency or sound-on-cane contact from adjoining walking surfaces at interior locations....
-
a) Enforcement
Risk management is the responsibility of the architects, engineers, interior designers, landscape architects, contractors, subcontractors, vendors, product manufacturers, building owners...
-
Purpose of the project
the body of the Guidelines, but rather to assist industry in developing dimensioning and measurement conventions appropriate to the different materials and methods used in exterior and interior...
-
Enforcement
Risk management is the responsibility of the architects, engineers, interior designers, landscape architects, contractors, subcontractors, vendors, product manufacturers, building owners...
-
11B-220.1 Automatic teller machines and fare machines
If a bank provides both interior and exterior ATMs, each such installation is considered a separate location....
-
2. Typical Issues for People Who are Blind or Have Low Vision
routes....
-
Accessible Slopes
That means for every inch of height change there must be at least 20 inches of route run....
-
Boarding Piers at Boat Launch Ramps
The exceptions for gangways, previously described above, may be applied to boarding piers (see Accessible Routes)....
-
Passing Spaces (R302.4) (Section-by-Section Analysis)
Passing Spaces (R302.4) (Section-by-Section Analysis) Where the clear width of pedestrian access routes is less than 1.5 meters (5 feet), passing spaces must be provided at intervals...
-
Running Slope
In other words, the slope is the difference in elevation from the beginning to the end of a part of a trail, outdoor recreation access route, or beach access route, measured in the direction...
-
§ 36.403(g)(2)(ii)
(ii) An accessible route to the altered area;...
-
Sec.36.403(g)(2)(ii)
(ii) An accessible route to the altered area;...
-
PEDESTRIAN WAY
A route by which a pedestrian may pass....
