Standard Features: The 360 offers the following standard options: 96" cab height Choose from 2000, 2500, 3000 or 3500 lbs. rated loads Choose from 100, 125, or...
Search Results "Bench Height"
-
Federal Elevator 360 Passenger Elevator
-
Alterations
is defined as remodeling, renovating, rehabilitating, reconstructing, changing or rearranging structural parts or elements, changing or rearranging plan configuration of walls and full-height...
-
M301.3 Transfer Supports
Height: Located no less than 6 inches (150 mm) and no more than 19 inches (482 mm) above the patient support surface Horizontal Distance from Transfer Surface: No more than 3 inches (...
-
Test Procedures
ASTM F 1292-99 test specifications (ASTM 1999a) and F355-95 test methods (ASTM 1995) were used at a test drop height of 3.05 m (10.0 ft) and 1.83 m (6.0 ft), respectively....
-
III-4.4100 General
In many facilities, telephones, drinking fountains, mirrors, and paper towel dispensers are mounted at a height that makes them inaccessible to people using wheelchairs....
-
ASME
The maximum permitted height for operable parts is consistent with Section 308 of this document. The standard also addresses attendant operation....
-
EXECUTIVE SUMMARY
, eye height, wheelbase, wheel spacing, wheel diameter, tire/wheel width, tire type....
-
Grainger Tough Guy Toilet Seat Cover Dispenser, White
Technical Specs Item: Toilet Seat Cover Dispenser Series: Tough Guy Capacity: 500 Material: Plastic Color: White Height: 11-1/2"...
-
GameTime Merry-Go-All Play Component
Model: 5055 Use Zone: 18’ 11” x 18’ 11” Fall Height: 4’ Age Groups: 2 to 5 or 5 to 12 Years Merry-Go-All is a fully accessible, forward-facing inclusive spinning event for...
-
Sizewise Bari Rehab Platform
Features such as the open side rail design, the low working height of the deck and the simplified hand control all reduce stress of the patient as well as the caregiver....
-
Willoughby Industries CEL-Multi-Station Lavatory Series
ADA and ANSI Compliant: When lavatory is mounted at standard 34" rim height it is designed to comply with applicable ADA and ANSI Z124.3 and Z124.6 accessibility guidelines....
-
Tork Elevation® Foam Soap Manual Dispenser White
Product Data System - S4 - Foam Soap System Material - Plastic Height - 11.3 in Width - 4.5 in Depth - 4.1 in Color - White...
-
Freedom Trax Motorized Track System
Specifications Weight Capacity: 285lbs Weight: 55 lbs without Batteries Fits Wheelchair Width: 16" to 26" Overall Length: 36" Device Height: 9"...
-
EVSE Garage Overhead EV (Electric Vehicle) Charger for Parking Garages & Multi-Dwelling Units
The charger can be configured to activate by local or remote control, and when triggered, will automatically lower the charging connecter to an ADA‐compliant height....
-
Queue Solutions QueuePro Twin
Specifications Height: 40” Weight: 22lbs Post OD: 2.5” Base Diameter: 14” Construction: Post – steel...
-
Pilot Rock UT Series Side Accessible Picnic Table Using Recycled Plastic
Model UT Side Accessible Tables offer 30” nom. table height (to top of table); 18” nom. seat height. Diagonal braces are used to support and reinforce the table structure. ...
-
Guardian Barrier-Free Safety Station with WideArea™ Eye/Face Wash GBF1909PCC
Profile of unit is “flattened” to comply with maximum height and knee clearance requirements....
-
Background
In Phase I, processing techniques and material properties were evaluated in small bench-top and full-depth laboratory tests (Laufenberg and others 2003)....
-
E. What are the General Requirements for Curb Ramps in the ADA Standards for Accessible Design?
which is the slope perpendicular to the direction of pedestrian travel along the sidewalk) to direct water toward the street for drainage, the rise of a curb ramp is often greater than the height...
-
Standards for Individual Captioning Devices (Section-by-Section Analysis)
These commenters wanted the Department to ensure that the text that is exhibited on these devices is readable with good contrast and good text size, that it be available at a reasonable height...
-
QUESTION: WHEN A RAIL OPERATOR CONSTRUCTS A NEW STATION PLATFORM OR ALTERS AN EXISTING STATION PLATFORM, DOES 49 CFR PART 37 REQUIRE THE RAIL OPERATOR ENSURE THAT THE PLATFORM IS AT LEAST 8 INCHES ABOVE TOP OF RAIL, EVEN IF THE RAILROAD OPERATOR WILL PROVIDE ACCESSIBILITY CONSISTENT WITH THE REQUIREMENTS OF SECTION 37.42?
While a platform 8 inches above ATR generally does not provide level boarding, a platform at this height does facilitate boarding by ambulatory passengers, including passengers (e.g., elderly...
-
C204.1 General (Section-by-Section Analysis)
Similarly, these types of products do not typically provide transactional outputs covered by proposed 409. 407.12 Reach Height and 408 Display Screens....
-
Test Procedures
ASTM F1292-99 test methods were used at a constant test drop height of 3.05 m (10 ft) (Fig. 10). Maximum g levels and head injury criteria (HIC) were measured....
-
Test Procedures
ASTM F 1292-99 test specifications and F355-95 test methods were used at a constant test drop height of 3.05m (10.0 feet)....
